Pressure Plate to Flywheel Bolt Recommendations

[Rick Iverson]

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

[Dave Gomberg]

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

When I ran this sort of setup, I used AN bolts, washers and nyloc nuts. Never had a problem.

Dave

[DaveW]

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

Allen bolts and hardened AN washers with a tiny bit of Neverseez or equivalent at 18-20 lb-ft. Never had an issue with that.

[Rick Iverson]

When I ran this sort of setup, I used AN bolts, washers and nyloc nuts. Never had a problem.

Dave

Allen bolts and hardened AN washers with a tiny bit of Neverseez or equivalent at 18-20 lb-ft. Never had an issue with that.

Thanks, Fellas.