What part is this? Threaded throttle cable anchor? Titan Mk6

[skipdup]

Hi. 1st post. New to FF. Just bought a '70 Titan Mk6. And not a very good mechanic...

Can anyone tell me what these are called? They anchor the throttle cable at each end (carb & pedal). 5/16-24 threads.

I'm going to try and clean up the threads. But, if I could source new ones, I'd feel better.

Thanks!
Skip

[Mike B]

Pegasus calls them a barrel end clamp:
https://www.pegasusautoracing.com/pr...sp?RecID=12184

Comet calls it a cable clamp:
https://cometkartsales.com/collectio...=Single%20Bolt

5/16-24 seems HUGE, though. Are we talking something else?

[SteveG]

5/16-24 seems HUGE, though. Are we talking something else?

Those look like the cable housing mounts, you know the things that hold the cable assembly to the chassis, not the actual cable end fittings.

Steve

[skipdup]

Those look like the cable housing mounts, you know the things that hold the cable assembly to the chassis, not the actual cable end fittings.

Steve

Yes. They hold the throttle cable to the chassis. Bolt goes through a hole in the chassis... The female thread is what the throttle cable threads into.

Thanks!

[SteveG]

Maybe these guys can help https://teamterrificracing.net/TitanRegistry/

Personally, I'd make my own but I have a lathe.

Steve

[teamwisconsin]

https://www.piercemanifolds.com/THRE.../99005.355.htm