Open Motorsports Classifieds
Open Motorsports WantedAnybody have a good draw bolt they're looking to get rid of ?
Mk9 draw bolt wanted
Anybody have a good draw bolt they're looking to get rid of ?
Last edited by stonebridge20; 07.26.23 at 9:30 AM.
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
Can’t help with a spare for you, but when I wanted one a few years ago, I had to make one. Should be easy. If my memory is correct, the TPI is some odd number, and was tricky to find a die.
Pretty sure it was 9mm. Maybe 9x1.
One on eBay right now
-John Allen
Tacoma, WA
'82 Royale RP31M
(‘72 Royale RP16 stolen in 2022)
7mmOriginally Posted by Lastminuteracin
1.0 TPI
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
If push comes to shove, call ScottyYoung
draw bolt
The price listed on Scotty's website is only $55.86, his part-no. INV-040390
hardly worth looking for a used one let alone making one or having one made
Jim
I've got Scotty working on a project right now anyway. I'll just get one from him when he return ships to me.
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
Mildly curious.. WHY do you need one? Did the old one BREAK, lost? If it broke, any idea why? Isn't it just a 'holder' with no load during normal use? Been quite some time since I had a hewland apart and my memory gets more fuzzy every day
Steve, FV80
Racing since '73 - FV since '77
This isn't mine but they will break if you tighten them up. The manual says run in until snug then back off 1/2 a turn and pit the pin through the shaft and hole in the head of the draw bolt. I have seen many who tighten them up and it will snap it off due to the load on the thread.
Graham
In 40 years of playing this game, I've broken or ruined just about every part on a race car except a draw bolt so I decided it was time to frig one up, so I did.Mildly curious.. WHY do you need one? Did the old one BREAK, lost? If it broke, any idea why? Isn't it just a 'holder' with no load during normal use? Been quite some time since I had a hewland apart and my memory gets more fuzzy every day
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
I admire your dedication to completeness.
Steve, FV80
Racing since '73 - FV since '77
All set. Got one from Scotty last week.
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
There are currently 2 users browsing this thread. (0 members and 2 guests)
Posting Permissions
Reply With Quote