Aluminum Cooling Pipes

[Coochas]

Hi All,
In the process of identifying a small coolant leak from a loose clamp, it was noticed that the aluminum cooling pipes going to the left pod are partially worn through despite having rubber padding between them and the frame.

I checked Moses' website and I see the silicone hose parts but not the aluminum pieces. Does anyone know whee these can be sourced?

TIA

[WDF-2]

McMaster Carr for straight or Burns Stainless for bent pieces

[Coochas]

McMaster Carr for straight or Burns Stainless for bent pieces

Thanks.
I just texted Bruce Lawrence and he thinks Moses has the pipes but they're just not on the site.
I'll post again Monday when I call them.

[dmccallum]

Coochas
Ii is easy to miss but go back to the FM parts Website and go to "cooling". Look at the bottom of the page and you will find a link for page 2,3,4 etc. Check on page 2 for the pipes you need.
Dale McCallum

[Coochas]

Coochas
Ii is easy to miss but go back to the FM parts Website and go to "cooling". Look at the bottom of the page and you will find a link for page 2,3,4 etc. Check on page 2 for the pipes you need.
Dale McCallum

OMG Thank you!
It's not easy getting older. Sigh.