Called Carbotech and they have nothing and racing-stuff doesn't have KFPs available (only one set that is straight, not angled). What other options are out there that are better than stock? Looking to upgrade but can't find any options. Suggestions?
Called Carbotech and they have nothing and racing-stuff doesn't have KFPs available (only one set that is straight, not angled). What other options are out there that are better than stock? Looking to upgrade but can't find any options. Suggestions?
Change brake adjusing screws to straight and use KFP or grind shoes to fit angled adjusters. Porterfield used to mmake racing brake shoes but I don't know if they are still in business since Andy Porterfield passsed away.
butch deer
I ordered from them since he passed away, so I would say they are.
Has anyone had success getting KFP or Porterfield shoes for a Vee? I've sent a couple of people to Averill, but not heard anything back. Keith - if you see this, do you actually HAVE shoes for FV? Anyone using them? Success? Failure?
I'm fat for shoes at the moment, but can see the writing on the wall and am looking to the future.
Steve, FV80
I spoke with Kieth a few weeks back he has them but has no cores to get more so if we want something without waiting for the clowns at carbotech to get some we need to get together and get core to Kieth so they can be sent out.
Mark Filip
Mark,
That sounds good. I suggest that any vee guys that have cores send them to Keith so they can build up some stock. I have at least one set. In past years I just threw them away because CT didn't ask for them (wonder where they get THEIR cores?), but in the last couple of years, I got concerned and have been keeping them ... somewhere. I'll look and see what I can find (after the runoffs )
I think I'll send something out to the FV Registry about it when I get a few minutes.
Steve, FV80
I have at least 3 sets and I know a few guys that can rangle up at least
A dozen sets.
Have to check with Kieth to see what they need for a batch
Mark Filip
Mark,
I can have them made in any quantity, my problem has always been cores. Once I ran out of the boxes of old shoes that George Mazuro brought over, the problem arose.
KFP did by some "metals" in the past, but they were rears.
The best way for me to keep on top of supply is to send me both ends, either adjuster style.
I'll have a large box of cores going out to Keith early next week. Something on the order of 20 sets, more if I can get my buddy to dig his out
Dennis
Go to http://www.porterfield-brakes.com/ and solve your grief. Two compounds are available and frankly these shoes are more kind to the drums than the latest version of brand CT.
The above post is for reference only and your results may vary. This post is not intended to reflect the views and opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR. thanks, Brian McCarthy, BOD area 9.
I went there once before (and again just now). Their website is extremely poorly "organized" (if you could call it that) and I cannot find ANY reference to VW brake SHOES. If you found something, please send a link.
I'm bit taken aback by Keith's KFP price. And I thought CT was expensive. Now we're talking another $50 bucks up .. per axle.
I sure wish there was an affordable wide 5 disk brake conversion out there .... I LONG for $30 performance pads....
Steve, FV80
Ha! The LD20 pads are around $100 a pair and must have less than 1/4th the material!
I agree with the website being a bit weak but a phone call will answer your questions. Guess it's old school.
The above post is for reference only and your results may vary. This post is not intended to reflect the views and opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR. thanks, Brian McCarthy, BOD area 9.
Right off I found a $419 and $400 kit.
http://www.kustom1warehouse.net/Zero...it%205x205.htm
http://www.jbugs.com/product/22-2926.html
Is that not affordable? How much are shoes?
Brian
Rather than go to discs, why not just eliminate performance brake shoes.
We did not need them for the 1st 30 years of FV. I still run stock replacement shoes on my cars. Rears last for years. Fronts may last a year or more. Drums last forever. Endless availability! Available at NAPA.
Hopefully, "dumbing down" FV could be accepted in this case.
Last edited by problemchild; 09.13.12 at 7:25 AM.
Greg Rice, RICERACEPREP.com
F1600 Arrive-N-Drive for FRP and SCCA, FC SCCA also. Including Runoffs
2020 & 2022 F1600 Champion, 2020 SCCA FF Champion, 2021 SCCA FC Champion,
2016 F2000 Champion, Follow RiceRacePrep on Instagram.
Hadn't actually searched in 3 or 4 years. Last I looked - with diligent searching - the best I could find was something over $800. This does interest me. There is no weight info - I wonder what the comparison weight is? Also - the jbugs kit uses 2" drop spindles, so not applicable ... unless we allowed that too.
I was a proponent of allowing disc brakes several years ago, but the class members shot it down. Maybe thoughts have changed?
Let's see. The complete conversion kit (front only) costs about the same as 2 sets of (performance) brake shoes - but no info on the cost (or source) of replacement pads.
Anyone else want to comment?
I wonder if Kustom1 could keep up with a sudden influx of orders .. say 40 or 50?
Steve, FV80
You really want to put crap like this on our cars? Believe it or not drum brakes are pretty efficient. I think easiest way is to get together and find someone to produce shoes at a more resonable price (if that is even possible)
http://youtu.be/XJsOMuvpghI
remember most of the parts will be from china
Mark Filip
Steve -
Make sure you stop by at the runoffs so we can chat a little bit about brakes.
Michael V.
95% of type 1 beetle parts are far superior than the crap that is on new cars trust me I have been working on this garbage for 30 years. When is the last time you saw a Chevy cavalier running, dodge K car Or a ford tempo they made millions and they are all gone and these cars had tons and tons of Chinese parts.
The only problem with drum brakes are heat. Can we run a brake duct to the brakes per SCCA rules (I have no clue I never looked) If the heat was reduced we may be able to get away with a less agressive shoe. Brake duct could be made for peanuts. Just a thought
I understand you get what you pay for in china. I'm saying it's crap and I don't care if it was free it's not something I want to buy for a race if I had a choice.
Last edited by Mark Filip; 09.13.12 at 1:33 PM.
Mark Filip
Before you go on talking about how Chinese stuff is crap, take a very good look around you. Where was your computer made? The pieces and devices that connect you to the Internet? Your tv? Your clothes, most of the components in just about everything..?
Chinese "crap" is as necessary to the American way of life as water.
Moving on, disc brakes would get my vote, and I have been told by more than one person they'd never consider driving a Vee because the brakes look silly, but - does anyone think this will ever happen?
Exactly it's all crap cloths don't last long sneakers last a month and tear open everyone wants to smash there computers cars rust in a year because of cheap metal. We have American made cars that are 50 years old sitting in fields still. It's all works but it's disposable. I use it because there is nothing else availible.
I'm for disc brakes as well just give me something that I will feel safe with and not kill someone with.
I don't care if people tell me my brake look silly I can name a few other classes that have disc brakes and I can out brake most with old drum brakes. Making a decision on looks is not always the right choice.
Last edited by Mark Filip; 09.14.12 at 11:32 AM.
Mark Filip
racye13,
I talked with porterfield on Wednesday of last week to order a set of brake shoes and they said they have plenty in stock. I took a session of the test day I was running to trying "beding" them in a little and they felt great by the time I pulled in. A friend uses them on her vee and she loves them. They also came out cheaper than the CT's I previously bought (my final bill was $237 for both axles). I would suggest Porterfield for a replacement to the CT
They sell two compunds; the R4 and the RD4. They suggest the R4 as it wont tear up the drum as bad.
Thanks, Russ. I was waiting for someone to provide info on that source.
Mark - my emphasis in this thread was on AVAILABILITY. Most of us have been using CT for years. Now that they are no longer a valid supplier (at least for the last year or so), I was very interested in alternate options. When I heard the price of the KFP's, it made me think that DISC BRAKES (conversion kit) might, again, be a better option for the class.
I feel it is the Committee's responsibility to "keep an open mind" about parts supply issues and "SEE" as far into the future as we possibly can to keep the class thriving (2nd highest entry at the runoffs this year ... only SRF has more).
Steve, FV80
Yes I do use Porterfied (as mentioned above) and they are great! They do have many in stock and it is $119.00 per set. I switched to them this season and I have not had any issues.
RD4 is better if your brakes get hot (depends on the tracks you run) but R4 is better on the drums.
Here is the contact info: 949-548-7783 or 800-537-6842
email: sales@porterfield-brakes.com
They will ship them to you in no time!!
Kim Madrid
FV1 291
+1 on Poterfield's inventory, service and the R4 compound.
“Racing makes heroin addiction look like a vague wish for something salty.” -Peter Egan
Steve,
We have 37 entered at the Runoffs and they put the F-500 in with us again?
I think SCCa would like to see open wheel go away.
Use the toll free number, or, if within CA use 949-548-4470
Just ordered a set of fronts in the RD4 compound which are in stock.
Scott
As much as I HATE it, keep in mind that FV was.. IIRC... 4th last year in entries - we were trumped by SM and ... wasn't it EP?
At any rate, SCCA (even in their INFINITE WISDOM) cannot (obviously) predict exactly WHO will register for the Runoffs NEXT year.
They did the best they could.
IMHO, every class that has less than 10 participants at RO's should be grouped with other classes in the same situation - at least THREE classes per group. They'd still have less than half of the number of cars that OUR group will have on track.
Steve, FV80
Is there anyone that has experience that can compare the CT to the Portefields on a track that is fairly aggressive on brakes?
Mark Filip
bahahaha.. So with shipping and tax, that's not far from $400 for a car. Boy they better last a whole season, cause disc brakes are sounding cheaper and cheaper every day
What is the consensus on the new CT liner? What do people who actually tested them think of it?
Regardless of the performance (whether the new ones are better or worse), a price increase of 30% on a product is a major event. Even more when it adds to an already high purchase cost.
Thanks,
Jean
----------------------------
Jean-Sebastien Stoezel
Western Canada Motorsport Association (WCMA)
FV #0
Folks, I have access to mass produced brake shoes that sell for $50 an axle for fronts and $45 an axle for rears plus freight. They are similar to the old Mintex shoes and contain metal fragments to deal with the heat. I have tests planned in the near future for them but know some national level drivers that run them. They do require a bit more pedal pressure and need warming on the pace lap, but I've been told they work fine and are drum friendly.
The sets I received needed arching and that may be a challenge since OSHA banned the machines from general use in shops. That doesn't mean that you cannot arch them yourselves with a belt sander since it's not rocket science to do it. Just remember to wear a mask and do it outside.
If there is enough interest, I will outline a procedure for arching and place an order.
The above post is for reference only and your results may vary. This post is not intended to reflect the views and opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR. thanks, Brian McCarthy, BOD area 9.
There are currently 1 users browsing this thread. (0 members and 1 guests)