Pectel T2 connector

[hammyjer]

I am wanting to adapt my FC from a Pectel T2 to the newer PE3 ECU, and am trying to find the 26 way AMP male connector to make up an adapter. Does anyone know where one of these connectors can be sourced? Or better yet, a source that makes adapters?

[BeerBudgetRacing]

For some reason I think Veracity makes one.

https://veracitydata.com/about-us/

Contact Dave or Ellen.

[Twill45]

I am wanting to adapt my FC from a Pectel T2 to the newer PE3 ECU, and am trying to find the 26 way AMP male connector to make up an adapter. Does anyone know where one of these connectors can be sourced? Or better yet, a source that makes adapters?

Reach out to Zentek on this. Giles was willing to make me the adaptor or send me the schematic to make it myself.

[David Ferguson]

For some reason I think Veracity makes one.

Zentec is the right source for Zetec related harness bits.https://zentec-us.com/

[John LaRue]

There have been some patch cables built however they are quite cumbersome. As an option I had the harness split short of the ECU and added an Autosport connector. I had one pigtail with the Pectel connector and another with the PE3.

[Rick Brannon]

I know I’ve seen the Amp connector somewhere however the file type from my iPhone doesn’t appear to be compatible, anyway the connector number is 827535 Mouser electronics https://www.mouser.com/ProductDetail...wE9_JTRH1qqwls