Kent Cosworth MAE Holbay Ford. …..BLOW OUT SALE

[Chris De]

Kent Cosworth MAE Holbay etc. ….. BLOW OUT SALE

Closing Shop and Moving
Years worth of Kent race and stock parts
WAY TOO MUCH OTHER STUFF – about 2/3’s of the parts included below
Prefer to sell as a complete package but based on interest will consider major individual parts sales
Can deliver to Lime Rock, Glen, Indy, Summit and ??? Vintage events
PACKAGE DEAL $12,000 -

Cranks

#	Stroke/CC	Mains	Rods		Counter balance		Notes 82	$$$/BO
1	58	-0.01	Std		4 Full		4 Hole Dowel Cam Gear	1200
Steel	1100				Dril/Tap/Plug		Gear cam drive Fitted
2	58						Full 6 Couter WT
Steel	1100	Std	-0.01		8 Full		6 Hole + Dowel	1200
		+			Dril/Tap/Plug		Removable Belt Spacer
3	63
Stock	1300	Std	Std		4 Full		6 Hole + Dowel - Scuffed Rods	300
2730E							Standard Nose
4	63	Mains					1500
Stock	1300	Std	Std		4 full		6 Hole + Dowel	300
2730E							Standard Nose
5	63
Steel	1300	Mains			4 Full		12 Hole BDA	1200
		-0.01	-0.01		Dril/Tap/Plug		BDA ext. Nose/can be removed
6	58
Steel	1100	Std	Std		8 Full		# 3 Rod Needs Rework	500
		+					Standard Nose - 6 Hole + Dowel
7	77.6
Stock	1600	Mains			4 Full		6 Hole + Dowel	300
FF		-0.01	0.01		Needs a Polish		Standard Nose
8	77.6
Stock		Std	Std		4 Full		6 Hole + Dowel	400
FF		+					Standard Nose
9	77.6
Forged		Mains			4 Full		6 Hole + Dowel	700
		Std	Std				Standard Nose
10
Steel	48.4	-0.01	-0.01	Gear			4 plus Dowel	1500
					4 full		(Gear cam Drive Fitted)

Blocks	Model	Bore	Deck Ht	Main Bearing	Features	Cost
1 MAE	120E	75	7.72	Steel Caps	Steel Main Bearings, Sleeved to underbore, Gear drive with 48.4 Steel Short Stroke Crank> Excellent , -.010 Rod/main Crank, 4 bolt/1 dowel pin
	H Mod 850cc				Currently fitted with Steel 48.4mm Crank Rod & piston assembles. Cam and lifters	$2,500
2	105E Sock				Stock 3 main bearing - Rough	$200
3	701M L	85	7.78 Stk	Steel	Block / Assembly - Steel Cam Geer fitted to block. Holbay long steel rods with new Cosworth Piston assemblies. Steel 58 mm crank gives 1300cc	$900 / $2500 complete
4	701M L	84	~7.75	Squ Caps	Fitted with brazed in liners	$750
5	AX 631	82		Stk Square	Heavy Duty Industrial Block	$800
6	711M AA	83			Blue 7 2.5/16 Deck	$600
7	711M AA	81			7 3/16 Decl	$600
8	2737E	82			Over bored .04	$500
9	2737E	81			Steel Center	$600
SOLD	2731	Stock Morgan / 1500 Complete engine with GT Carb intake/exhaust	Stock Morgan / 1500 Complete engine with GT Carb intake/exhaust
Flywheels
		10 1/4" Fly wheels, AP Pressure plate Assembly, New Disc/ - 7.25 disc 90 Tooth
1 steel	8.4 Wt					$500
2 Al	4.0 Wt					$600
Steel		Cosworth , 9 hole, 9 pounds, Dia XX = needs slight clean up surfacing				$300
	Stock Kent					$150

Heads
Nash Small valve		$1,400	Steck 10 Races -FRESHENED-Race Spare
	casting	GH
	Fresh Valve Job
	Ovate Wire / Beehive spring, light wt retainers and 7 degree Keepers, new guides.
		6 weekend - current Race Spare
	Set to 90 #'s at Nose
	Valves	7mm	Intake	1.482
			Exhaust	1.307
	Deck Ht.	2.986
	CC	27.24
Loyning	Big Valve	$1,200
	Casting	J
	Freh Valve Job
	9/32 Dia	new retainers and spring seats Set to 90 #'s
	Valves	9/32"	Intake	1.59
			Ex	1.31
	CC	31.8
	Deck	3.1
			Exhaust	1.307
	Deck Ht.	2.986
	CC	27.24
Cross Flow Heads
	Stock
		2 Flat stock			$200/pc
		1 semi Chambered Stock			$200

48.4 MM Stroke SCREAMER
850 CC Holbay Short Stoke Rotating Assembly / Engine - Ideal for HMod
Sleeved 120 E 5 main bearing block to 75 mm Bore. Block with Gear Cam Drive (the good one with the eccentric lash adjustment), Steel mains, Steel Crank and Rods with 12 point bolts. Eagle pistons. 75 mm with 48.4 mm Stroke crank – 850 cc’s
Complete rotating assembly with cam/lifters, cover plates.
$2500 or Best offer

Holbay Front or Titan/Burton Side Dry Sump pumps (your choice) with steel DS pan - add $800
Fly Wheel - Aluminum 4 #’s or steel 8 pound - 9" diameter Flywheel and AP 7 ¼” Pressure Plate assembly
MAE 1300 SCREAMER - Disassembled but complete Holbay original Build

Short Stroke – 701 L 5 main bearing block - Big Bore 85 mm with Gear Cam Drive (the good one with the eccentric lash adjustment), with Steel mains caps, Steel Crank and 6 long Holbay Rods with 12 point bolts. New Cosworth 2 ring pistons and several sets of used pistons with new 3 ring packs. 58mm Steel Crank, Complete rotating assembly with A 9 Kent cam/lifters, cover plates.
MAE. Holbay front cam drive dry sump pump and front pick-up dry sump pan – OR Side mount Burton or Holbay dry sump pump. Small diameter flywheel with AP 7 ¼ clutch/pressure plate assemblies. 4 pound aluminum or 8.7 pound steel - 90 tooth, 9" diameter. With Bearings and hardware for assembly - Some additional spares. Several sets of Push Rods.
MAE Down Draft Head assembly. Casting 105E LM , Deck height 2.92 – excellent shape, unshrouded 1.45 Intakes/ 1.25” Exhaust with dual valves/spring assemblies/ trick Al rocker shaft pedestal assembly. Spare complete Rocker arm assembly with steel rocker shaft pedestal carrier. With period Cosworth, Holbay Al valve covers available Two complete MAE Intake manifold assemblies with linkages.
$6500 Can mix and match –

Several 1300 711 AA / 701 L blocks – 83.5 /85 mm bore,

HEADS
Non Cross Flow Heads # 1 – Fresh valve job with only 6 weekends on fresh build. Casting model GH. Valves - 7 MM diameter - Intake 1.482”/ Exhaust 1.307”. Deck Ht. 2.986”. Chamber 27.2 CC’s. Ovate Wire/Beehive springs, light wt. retainers and 7 degree Keepers, new guides. Set at 90 #'s on base. Current Race Spare for my super fast Seven $1,400

#2 – Loyning – Fresh Valve Job, J casting. 9/32 Dia valves, 9/32" Dia – Intake - 1.59” / Exhaust 1.31”. Chamber 31.8 CC’s. New retainers and spring seats. Set to 90 # on Base $1200

Cross Flow - Several stock semi chamber and flat Kent heads

3# MAE - Down Draft Head assembly. Casting 105E LM , Deck height 2.92 – excellent shape, unshrouded 1.45 Intakes/ 1.25” Exhaust with dual valves/spring assemblies/ trick Al rocker shaft pedestal assembly. Spare complete Rocker arm assembly with steel rocker shaft pedestal carrier. With period Cosworth or Holbay Al valve covers available Two complete MAE Weber Intake manifold assemblies with linkages.

Starters - Several gear reduction /Tilton/Stock
Steel main bearing Caps – 2 sets – plus one Square cap production set
Cam gears/Dual Row chains – 2 Assemblies- dual row adjustable timing sprocket with wide tensioners
Gaskets– Several Cometic MLX 84 mm diameter .032 / .036. Intake/Exhaust for Cross flow and Non Cross flow – others. Several intake/exhaust gaskets for both CF and Non CF
Hardware/covers/ARP block/head bolts
Dry Sumps -
Engine Rod and Main bearings - King/ ACL /Vandervale > standars/ -.010 / -.020 About 25 sets
LOTS MORE !!!
Chris D 585 330 5456 cdmad4494@aol.com

[Rick Iverson]

Wowza!