Zetec crank sensor

[Bob Wright]

Does anyone know what the plug is on the Zetec or MZR crank sensor? And, where the best place to source it?

Thanks,

[tstrang]

Does anyone know what the plug is on the Zetec or MZR crank sensor? And, where the best place to source it?

Thanks,

Just happened to be in the shop, my harness connector for the crank sensor is an: AERO MS3476l8-98S. I've been using: prowireusa.com

[Bob Wright]

Thanks! To confirm, that plug is on the crank sensor side, not the harness side? I'm not near my car

[tstrang]

That is the harness connector part number, the sensor coupler is: MS3470L8-98P.

[Bob Coury]

Make sure that you get the correct crimp tool for the M39029 spec contacts. I work with this kind of stuff weekly-I can let you know what you need to order if need be. They can be a PIA to look up.

[Bob Wright]

After looking into how tricky it is to wire the plugs...I opted to send them to Zentec wiring to be done properly.