I am looking for a good, rebuildable FT200. No junk please. I am in California, USA and will inspect before purchase.
FT is for an early 1970's Formula Atlantic. FOUND IT
I am looking for a good, rebuildable FT200. No junk please. I am in California, USA and will inspect before purchase.
FT is for an early 1970's Formula Atlantic. FOUND IT
Last edited by johnhafkenschiel; 01.29.25 at 10:12 AM. Reason: FOUND RESULT
Rick: On the bottom, under the R&P, (on the sample, I have) are four 7/16" holes. On this Brabham application, the holes are not needed. I can change out the sideplates (I will need the kind with the top mount bosses that are behind the subframe crossmember.)
Last edited by johnhafkenschiel; 12.20.24 at 10:57 PM. Reason: punctuation
Having just sourced two FT200s for complete rebuild I can say they are rare, especially in good shape. You might try Kevan McLurg in the UK. He has advertised one lately.
http://www.racecarwarehouse.co.uk
Hewland FT200Hewland FT200 for sale fully rebuilt with new 4 bolt Historic casing and side plates
Currently with 831 cwp and Plated diff but the cwp ratio can be changed to 931
Price: £15000
Charlie Warner
fatto gatto racing
'Cause there's bugger-all down here on earth!
I think I have an ft200 case and a bearing carrier hiding on the shelf. I will see if I can get some pictures of it today. I also have a bucket full of ft200 gear sets from back in the day.
There are currently 1 users browsing this thread. (0 members and 1 guests)