Beasley B2 Terrier $5800

[djones]

This one off chassis was built by Don Baker in the 90's. Utilizing KBS F500 front end components and 10 inch wheels. Rear wheels are 13 inch and uses Crossle uprights.
The car is powered by a yamaha fzr 1000cc engine. Engine was removed and taken to a local motorcycle/racing shop for inspection. After being Given a thumbs up and a carb rebuild the engine was reinstalled.
New parts include : new cv joints and boots. Braille battery,front brake rotors, rear master cylinder, intake filters, rear spoiler.
Spares included 5 front wheels. 2 with mounted slicks,rear brake caliper, box of chain enough for 2 chains. Chassis stands and a quick jack. Bodywork molds are also included.
Pretty interesting car deserving of some tlc .
Very roomy. I'm 6' 200lbs and get lost in the thing.
My 6'3 220 plus brother also fits.
$5800. aluminum open wheel trailer available .
Happy to answer any questions.
More pictures upon request
Thanks
Don

[jrh3]

If I was going on my head I would like that cage

[djones]

I agree. The car looks beefy but it weights in under
900lbs. Car does have scca log book. Annual done 10/ 24/24

[Bill Schmidt]

This would make one bad-ass B-Mod car in SCCA autocross.

[Craig71188]

This would make one bad-ass B-Mod car in SCCA autocross.

Hmmm, Don, wheelbase and track width?

[10rmotor]

I agree. The car looks beefy but it weights in under
900lbs. Car does have scca log book. Annual done 10/ 24/24

With or without driver?

[djones]

Without. I have the car with fluids and a gallon of fuel at 850lbs

[Brian Linn]

Is this car legal for P2? How many seconds slower would it be than a front running P2 at Mid Ohio or similar track?
Is is set up for road racing or AutoX?

[djones]

Documented as a p2 in the scca log book. Much slower than a modern p2 car. Fun regional , vintage , track day or solo car. Set up for road racing currently

[djones]

Wheelbase is 91"
Front track 62" tire size 19.5/6.5/ 10
Rear track 60" tire size 20/9/13

[10rmotor]

I would imagine at least 8-12 seconds slower, especially with that fairly ancient motor probably has 140 Hp. Top front runners are looking at at least 200 Hp and similar weight. But as a regional only car it could be loads of fun.

[DanW]

I would imagine at least 8-12 seconds slower, especially with that fairly ancient motor probably has 140 Hp. Top front runners are looking at at least 200 Hp and similar weight. But as a regional only car it could be loads of fun.

But what a way to get into track days, time trials, regional racing with a real race car that could run circles around high dollar road cars. Tow it with a mid size SUV or pickup and have some fun.

[10rmotor]

But what a way to get into track days, time trials, regional racing with a real race car that could run circles around high dollar road cars. Tow it with a mid size SUV or pickup and have some fun.

Absolutely Dan. A small open trailer and a small box of tools is really all you need. Barring any major issues you should be fine. I would imagine this car is pretty robust, as most DSRs were back in the day. My Amacs from new were just about indestructible. In those days we ran the old kawasaki zx10 dry sumped, no alternator with carbs. Just run the battery charger between sessions, fill it with gas, check the tires and off you go!

If anyone is looking for a fun regional or track day car on the west coast, PM me, I may be able to find one for you!

[djones]

I had this car shipped from LA to Akron, Ohio Late December 2022. Cost was $1300
I do have a duel axel aluminum trailer that can be sold with the car for $1600. Will post a couple
Pictures tomorrow.

[djones]

Sold with the car only
6'3x 14 alunimum duel torsion axel.
Weighs in at 980lbs. 95" track.
Comes with Bill of sale and Ohio registration. Comes with aluminum ramps
$1500

[djones]

New price
$5500.
would love to have a new project in the shop for Christmas.
Happy Thanksgiving!

[lewischuck2000]

Would you be interested in trading for a 2011 Miata?

[djones]

Thanks for the offer but have to say no
At this time.

[djones]

New price just in time for Christmas
$5000

[Dave Woodmancy]

This would be a seriously fun car for a place like Waterford Hills, especially at the buy in price.

[djones]

The car and parts have been sold.
Thanks to all that inquired.

[ejsprint30]

If whoever bought this is interested in selling the molds, please message me.

[mark53]

Absolutely Dan. A small open trailer and a small box of tools is really all you need. Barring any major issues you should be fine. I would imagine this car is pretty robust, as most DSRs were back in the day. My Amacs from new were just about indestructible. In those days we ran the old kawasaki zx10 dry sumped, no alternator with carbs. Just run the battery charger between sessions, fill it with gas, check the tires and off you go!

If anyone is looking for a fun regional or track day car on the west coast, PM me, I may be able to find one for you!

Hello; Replying to your message above regarding possibility of sports racers for sale on the west coast. I am in Washington. Let me know if you or someone else is selling an interesting car. Thanks, Mark

[djones]

Any intrest in Sports 2000?
There's an awesome Tiga for sale as we speak.
Will be glad to pass along the info since I can't buy it lol
Good luck with your search

[10rmotor]

Hello; Replying to your message above regarding possibility of sports racers for sale on the west coast. I am in Washington. Let me know if you or someone else is selling an interesting car. Thanks, Mark

You have a pm