Formula F Garage Sale

[problemchild]

Set of Penske Frankenstein Shocks with 8765 Internals
These have been my development shocks over the past decade or so. Silver 8760 bodies from a 97 VD with 8765 (4-way) shafts and eyelits. I believe they max out at 11" but they have droop limiters installed and are currently in the 10.6" range. They currently have the pistons and valving used by John Hayes when PR1 ran Colton Herta in a F1600 Mygale. I owned that car at one point and kept the internals when the car moved on. I can substitute the pistons and valving used by Eric Langbein in either F1600 or F2000, as I also have those assemblies in inventory. I could also supply with requested alternate valving. Configured to suit, $2500/set. Note one body has been repaired. The end was welded on years ago. These shocks will fit many cars including 97-98 VD, Piper, and Mygale. I have just been carrying as spares recently so would like to move them out.
Price Reduction Now $2K. SOLD!




LD200 Gears
Hewland Top 21-24 Very Good
Hewland Top 24-26 Good (Sold)
Hewland First 20-32 Very Good
Unknown First 18-29 Very Good
$200 each Now $150



Mygale and Euroswift or ? LD200 Input Shafts

I have two LD200 input shafts, both in excellent condition.
23 1/16" long with 7/8" clutch splines from 2006 Mygale kent. About 3 hours total use. $500 Now $300
17 9/16" long with 1" clutch splines from early 90s EuroSwift kent (VD clone not Swift clone). $300. Now $100

CTW Shock Dyno $8500 OBO >>>>>> Price Reduction to $7500.
Full info at http://www.riceraceprep.com/ctw-shock-dyno-for-sale/
I have an offer on the shock dyno and expect I will complete the sale shortly. Final price reduction to $6K.

Adding more items shortly.

RiceRacePrep-at gmail.com

[problemchild]

Added items and revised others.
Stuff needs to go!

[problemchild]

Updated and added shock.
Merry Christmas!

[problemchild]

Still for sale!
RiceRacePrep-at-Gmail.com

[problemchild]

Items added and prices revised. Stuff needs to go!

[problemchild]

Revised. Added shock absorbers.

[problemchild]

Sold items deleted. Lowered prices on shocks and shock dyno. Thanks!

[problemchild]

This really needs to go. In 10 days it is due to go back to CTW.
$7500 OBO

More info: http://www.riceraceprep.com/ctw-shock-dyno-for-sale/

[problemchild]

Shock dyno now $6500.

[problemchild]

Shocks sold. Final dyno price reduction to $6K. Thanks!

[problemchild]

I still have those input shafts. Open to reasonable offers.

Dyno got sold back to the manufacturer. When I see all the money wasted in our community on completely unnecessary but whizzy parts, it blows my mind that no one bought it. The software was the same as their 6-figure dynos, and it was the only such light duty unit on the continent. If anyone is considering a purchase of a CTW dyno, I can say that it may have been the best purchase that I have ever made. 5 star review!!!!!!

[problemchild]

I am cleaning out the shop of surplus parts. I will load up the back of the pickup truck and bring stuff to the Runoffs. Lots of misc FV, FF, and general race parts. If interested in something, please email me until Thursday morning. Thereafter, you can text me. I will be based at MS49 in the main paved paddock. We will be watching races, so you will need to make arrangements to meet up.

Quicklift Jack.
Needs clean up. $200


12Volt Electric Vaccuum Pump
Formerly used on FST dry sump engine do aid scavenging. Very rare. $100


Vertex Radios
6 functioning non-digital radios. With Chargers. Excellent support from SRC. $200



Very, very light 13 x 5.5 FF wheels
Oddball but very light. Perfect for rear CF. 3 3/4" bolt circle. Were $250. Now $100/pair


Virgin New Never Used Reynard Rads, 1 Pair
Not sure why I saved these. Now $300/pair


Mgale and Euroswift or ? LD200 Input Shafts
I have two LD200 input shafts, both in excellent condition.23 1/16" long with 7/8" clutch splines from 2006 Mygale kent. About 3 hours total use. $500 Now $300 Now $100
17 9/16" long with 1" clutch splines from early 90s EuroSwift kent (VD clone not Swift clone). $300. Now $100 Now $30

[problemchild]

The wheels are sale pending.

I will set the stuff out on some tables on Friday afternoon, so if people may want to check it out. I will be based at MS49 which is on the main road to the false grid (about a hundred yards before). If anyone has interest in specific parts please text me and we can meet up. I will arrive Friday am. 716-946-1857

[problemchild]

Still have the pair of Reynard rads. Now $250.
Quicklift jack is sold.

Adding 93 VD radiator shrouds. Need bodywork and paint. $300




Also adding original style 93 rad. Minor fin damage, $150
Full refund if leaks. These rads were very good.
I was hoarding them for a while and used them on my RF97..




Grouping 93 shrouds and radiator $400.

Adding late model VD rad. Note says crappy fins but no leaks. $100
Full refund if leaks. Good for emergency spare.

[kr]

Greg,

You really should have a classifieds license to continue to add new items to for sale posts.

KR