Push/Pull switches

[CM/FFdriver]

Hello All,

I have a push/pull ignition switch that I need to replace, what are your recommendations for a replacement.

Voltage
the amount of amp's
type
model

Thank you

Ben

[BeerBudgetRacing]

Is it an aircraft circuit breaker?

https://www.aircraftspruce.com/catal...on7274_2_3.php

or like one of these:
https://www.mcmaster.com/products/el...pull-switches/

Does it need to be push-pull ?

[CM/FFdriver]

I

or like one of these:
https://www.mcmaster.com/products/el...pull-switches/

Does it need to be push-pull ?

Like that one from mcmaster.com. I see it's only 10 amp's that's one of things i needed to know.

No, it does need to be a push/pull, something better?

Ben

[Steve Demeter]

Check your wiring but I think 10 AMPS is more than adequate for just about any application we might encounter other than a master switch

[FVRacer21]

This is the switch that was used on Citation FV as a master switch and I am using it on my FV as a ignition power switch.

https://shop.advanceautoparts.com/we...0051&langId=-1

There are cheaper versions and many auto parts stores do stock them, but I would carry a spare, or easy to replace with a toggle switch.


ChrisZ