I have a large selection of Lola Formula Ford parts for the 640, 642 and 644 available. Several years ago, a friend who bought a 640 asked me to restore it. While I worked on that car, someone else bought one and asked me to do the same. By that time, I had realized how good the 640 series is and purchased a car myself. After restoring and racing three different 640s and helping others as they raced their own Lola 640s and 42/44s, I learned a great deal about the cars as well as gathering up a reasonably large collection of parts.
Now, it is time to sell some of these parts so that other owners can make use of them. Some are new and a few are used. I have, in some cases, multiple copies of a specific part, both used and new. I bought "new old stock" from Lola, I found owners wanting to sell parts, I bought crashed cars and salvaged the good parts from them and I either made or had made parts which were found to be difficult to obtain otherwise.
I'll only list some of them in this post, because the entire list is long. I don't have every part for the car, but do have a lot and some of them are hard to locate. If you do not see what you need here, please send me a PM and tell me what you are looking for. I might be able to help. Alternatively, send your email in the PM and I will send the entire list. Not all the parts on the list are priced as yet, but I'll continue to update those not yet shown when priced. Or if you just need a question answered or some friendly advice about your 640, that's always available for free.
1. 642/644 Front upper wishbone - new, Lola production, original black paint w/ bearing spacer tube (will not fit 640) $375
2. 640 Front upper wishbone - new, Lola production, gloss black powder coat, w/ bearings (will not fit 642/644)
3. Front suspension pullrod - new, powder coated gloss black, but some shop wear (will not fit 642/644) $90
4. Steering tie rod - new, powder coated gloss black, some shop wear (will not fit 642/644) $100
5. Steering shaft with U-joint - new with some shop wear $100
6. Aluminum shift lever with plastic knob - new, excellent condition $50
7. Front ARB adjusting cable - new $150 rear also available same price
8. Throttle pedal - new, Lola production, original black paint $150
9. Clutch pedal - new Lola production, without pedal pad, nickel plated $95
10. Pedal assembly mount - new, Lola production, bolts to floor and accepts pedals, gloss black powder coat $265
11. Steering rack mount, pair - new, perfect condition
12. Rear "bumper" - new, never produced by Lola but essential if running long tail. Mounts body, rain light, jump plug $225
13. Shift linkage rod assembly - new factory U-joint, gloss powder coat, but some shop wear $225
14. Oil tank lower rest - new, some shop wear
15. Aluminum wheel retaining washers - fit between outside of wheel and wheel nut, w/ steel insert, new, perfect condition $75
16. Upright bearing locknut - special low-height Lola locknut, requires 40mm socket with 4 tangs at 90 degrees
17. Rear hub spacer - locates hub shaft in upright bearing
18. Rear upright bearing retaining ring
19. Front upright bearing retaining ring
20. Rear lower subframe - attaches under engine chassis to gearbox, new, Lola production, gloss black powder coat $475
21. Rear suspension radius rod - attaches bottom of frame at roll bar to bottom of rear upright, new, gloss black powder coat $100
22. Rear suspension rocker arm - new, Lola production, gloss black powder coat
23. Half shafts - new, bare, excellent condition $300 ea
24. Rear engine plate - 1/8" aluminum, new, fits between gearbox adapter and gearbox case
25. Rear ARB - new, Lola production, gloss black power coat
26. Rear upright - new, Lola production, no paint (this one came from Lola unpainted) $850 (also have used rear upright)
27. Chassis side panels - Both L and R sides available, laser cut 5052 aluminum, new, protective plastic film on outside $165
28. Steering rack assembly - original Lola production, used $700
29. Oil tank bracket - holds tank to rear of firewall, used, nickel plated with minor rust showing $50
30. Coolant tank (sometimes called swirl pot) - steel, Lola production, black paint, good condition $90
31. Rear suspension lower link - connects lower subframe to upright, Lola production, good condition, used
32. Front motor mount "Spider" - attaches front of engine to rear of frame, used, Lola prod, black paint w/bushing $200
33. Rear ARB subframe assembly w/ARB - not Lola, made from square tubing but nicely made, used, good cond $275
34. Rear upper rocker arm - new, Lola production, gloss black powder coat, both sides available
And the list goes on . . .
If you see something here that you need, please let me know. If you don't see the required part, many are not listed here, so I may still be able to help. A few photos are posted as examples, specifically the rear "Bumper" #12, rear rocker arms #34, 640 upper front wishbone #2, Shift linkage #13, and ARB adjusting cable #7. Happy hunting!