Hewland Gearbox Parts

[bikebone]

I have an FT200 input shaft approx. 12.75 in. long, 1 in. diameter clutch end with 10 splines.
Also, a MK4/6/8/9 input shaft that is approx. 10.75 in. long, 7/8 diameter clutch end with 10 splines.
And, a pair of HC218 (left & right) Hewland stub axles with a 4 bolt flange.

All of these parts are NOS, that is new and unused.

All reasonable offers considered.

Thanks!

[tppj]

I think I know the answer to this question, but do you still have a 7/8" input shaft available for a MK 9?

[seann]

I have an FT200 input shaft approx. 12.75 in. long, 1 in. diameter clutch end with 10 splines.
Also, a MK4/6/8/9 input shaft that is approx. 10.75 in. long, 7/8 diameter clutch end with 10 splines.
And, a pair of HC218 (left & right) Hewland stub axles with a 4 bolt flange.

All of these parts are NOS, that is new and unused.

All reasonable offers considered.

Thanks!

If you still have the 10 spline input shaft, please provide the price including shipping to Seann Burgess, 520027 Thislewood Rd, Markdale, Ontario, Canada N0C 1H0 thanks

[Rick Iverson]

Jim;

Welcome to Apexspeed. Be advised, you are required to post an asking price for each item listed.

I have an FT200 input shaft approx. 12.75 in. long, 1 in. diameter clutch end with 10 splines.
Also, a MK4/6/8/9 input shaft that is approx. 10.75 in. long, 7/8 diameter clutch end with 10 splines.
And, a pair of HC218 (left & right) Hewland stub axles with a 4 bolt flange.

All of these parts are NOS, that is new and unused.

All reasonable offers considered.

Thanks!