Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    09.12.01
    Posts
    0
    Liked: 0

    Post

    Steve Lathrop and Richard Pare are coming to Atlanta for the weekend of Feb 1-2, 2003 to present their "Racing 101" course. The course outline includes the basics such as suspension analysis, tire management, vehicle dynamics, shocks, chassis tuning and more. The schedule is Sat. 8:00AM - 6:00PM and Sun., 8:00AM - 12:00Noon. The cost is $300.00. The class will be limited to 20 people and 10 have already signed up. If you are interested or have questions, then please email me at [email="steverobertson@mindspring.com"]steverobertson@mindspring.com[/email]

  2. #2
    Member
    Join Date
    12.27.00
    Location
    Solon,Ia..........USA
    Posts
    55
    Liked: 0

    Post

    As someone who took this class last year
    (Albany, NY), I would highly recommend it.
    It was more than worth the time and money.
    In fact, I recorded the whole thing, and
    get more from it whenever I listen to the
    recording (long road trips).

    Sign up, you won't regret it,
    John

  3. #3
    Contributing Member Curtis Boggs's Avatar
    Join Date
    02.26.01
    Location
    Tire Wall
    Posts
    1,020
    Liked: 0

    Post

    17 spots taken so far!

    [size="1"][ December 30, 2002, 05:38 PM: Message edited by: Richard Pare ][/size]
    Racing Flow Development
    Simultaneous 5-axis CNC Porting
    http://www.raceflowdevelopment.com

  4. #4
    Contributing Member Curtis Boggs's Avatar
    Join Date
    02.26.01
    Location
    Tire Wall
    Posts
    1,020
    Liked: 0

    Post

    Assuming that no one backs out at the last minute, the class is now full.

    For those who missed out, we still have slots for the class in Indy the following weekend.
    Racing Flow Development
    Simultaneous 5-axis CNC Porting
    http://www.raceflowdevelopment.com

  5. #5
    Junior Member
    Join Date
    08.03.01
    Location
    Fremont calif.
    Posts
    2
    Liked: 0

    Post

    .... or in Springfield, Massachusetts the weekend before.

  6. #6
    Junior Member
    Join Date
    09.12.01
    Posts
    0
    Liked: 0

    Post

    A couple of guys have had to cancel at the last minute. If you are interested please let me know.
    [email="steverobertson@mindspring.com"]steverobertson@mindspring.com[/email]

  7. #7
    Contributing Member Curtis Boggs's Avatar
    Join Date
    02.26.01
    Location
    Tire Wall
    Posts
    1,020
    Liked: 0

    Post

    OK! We finally found a room large enough! Poor Steve wents nuts calling places - he's undergoing surgery to remove the earpiece now.... ;)

    The class will be at:

    AmeriSuites Galleria
    2876 Spring Hill Parkway
    Smyrna, GA 30080

    1-770-384-0060

    See you there!
    Racing Flow Development
    Simultaneous 5-axis CNC Porting
    http://www.raceflowdevelopment.com

  8. #8
    Member
    Join Date
    12.02.00
    Location
    Cedar Grove, NJ, USA
    Posts
    13
    Liked: 1

    Post

    Richard,

    Any chance you'll be coming to the DC area????

    Curtis

  9. #9
    Contributing Member Curtis Boggs's Avatar
    Join Date
    02.26.01
    Location
    Tire Wall
    Posts
    1,020
    Liked: 0

    Post

    Someone contacted us last night about setting one up out there, so keep your eyes on these forums for a possible announcement soon.
    Racing Flow Development
    Simultaneous 5-axis CNC Porting
    http://www.raceflowdevelopment.com

  10. #10
    Contributing Member Curtis Boggs's Avatar
    Join Date
    02.26.01
    Location
    Tire Wall
    Posts
    1,020
    Liked: 0

    Post

    We've had a couple of last second cancellations, so if there is anyone who wants to attend that thought that the class was full, just show up Saturday morning.
    Racing Flow Development
    Simultaneous 5-axis CNC Porting
    http://www.raceflowdevelopment.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social