Below are some pictures of my converted F500 Novakar to F600.
1.Before converting picture shows the 2-stroke Rotax engine installed
2.After installing the GSXR 600
3.The process of conversion
Remove Rotax and CVT drivetrain
Remove frame parts not needed
Fit new frame parts (Superbly fabricated by Dave Piontek and engineered by Jay Novak)
Ready for the welder
Back from the welder
Bolting on the suspension
Adding insulation between engine and fuel cell
More insulation
Install new oil pan
Install GSXR 600 engine
Plumb the water system
Routing the exhaust system (hardest part of the conversion)
Install the Individual Inlet Restrictors (two on the left)
Finished engine install
Ready to race