roller

[danshonda]

Looking for a clean/STRAIGHT road race legal f500 roller, or a f600 project roller. Looking to spend around $2000 or a little more for the right car. I live in Iowa so car needs to be close. Illinois/Minnesota/Wisc ect. Thanks!

[jim murphy]

Here is one -

http://cgi.ebay.com/ebaymotors/F500-...orcev4exp=true

You will have to ask the seller to remove all the snowmobile drivetrain (motor, clutches,
pipe, oil tank, etc) and sell them separately from the chassis. This chassis is good for the F600 conversion because it has the left side fuel inlet for fuel cell thus no problem with the MC exhaust header being too close to the fuel cell. We have two of these cars. Figure about $3K for the chassis/body with all the spares, radio and maybe camera? Then figure about $5K (plus MC motor) to have someone convert it including moving the final drive over to the left side and changing it to chain drive. There are many photos of this type conversion on the www.formula500.org/forum.php site.

HTH,
Jim

[carl berg]

Hello, I'm Carl Berg I live in Wisconsin. I'm putting up for sale a 1989 Red Devil, I don't know what you want to do with it but the car will come with an extra set of mounted slicks and a set of mounted rains. let me know what you think.