2008 Caracal D

[eospeed]

2008 Caracal D

Ohlins st44 shocks by Brenner Fab ,Roxanne SS Exh ,Quicksilver Engine , VSR short box, new style CDS data system with SSI Box ,Carbon Body by SKI Motorsports with spare nose.SS floor pan , chromoly roll hoops Makes weight with a 210lb driver.Comes with spares.Go straight to the front great car with 5 race Quicksilver 61+hp and data system. Way to many details to list. Prices below if you want the whole package make an offer

Erik Oseth
301 698 9009

[eospeed]

Bump still got it here rdy to race for the runoffs next year.


E

[mike g.]

So formula V can use a carbon (assuming CF) body but FF can't??

[eospeed]

So formula V can use a carbon (assuming CF) body but FF can't??

Correct

[quartzracer]

Nice car, what is the purpose of the 4130 roll structure? Was this fabrication transplanted as an update or did the frame come that way.

Eric

[eospeed]

Nice car, what is the purpose of the 4130 roll structure? Was this fabrication transplanted as an update or did the frame come that way.

Eric

I had them made and Fred built the frame with them new.Mainly for less weight up high in the car.


E

[eospeed]

Bump

[eospeed]

Ready to race

[eospeed]

Price update
Can be deliverd to the Runoffs or the Sprints race ready.

301 698 9009

[eospeed]

Still waiting for a new home.Im changing classes

301 524 2970

[eospeed]

Willing to split up the car and motor.

Sold 2010 spec quicksilver all new updates fresh and ready for Road America complete carb to clutch ( 1 third place runoffs finnish via Steve D)

2008 Caracal roller as listed above fast and light car-$7500.00 ( the kit is more than this with no carbon body work)

SoldCDS Co Pilot 2 with GPS

You could not build this car or motor for this kind of money.

Erik

301 698 9009
301 524 2970

[eospeed]

Engine Sold

Car is ready to have a motor installed and data system is still available

Erik

[eospeed]

Chassis is ready to be picked up I can install your motor if you like.



Erik

[eospeed]

Data system is sold roller is still ready for your engine or a new one from me $7500

[Johnny B]

Hi Erik,
Will the car fit a 6'3" 180 lb. driver ? Also I would need the header for the car. I would not need the wheels and tires.
Thanks,
John B.

[eospeed]

I would say yes .. it will make weight with a 220lb driver and Bill Noble fit in one so you should slide in might have to move the pedals.I will swap out the wheels and tires for the exhaust.


E

[Johnny B]

E-mail sent.
John B.

[eospeed]

Roller is still ready for a new home.

E

[eospeed]

Still ready to go

[eospeed]

The roller includes a Roxanne Exhaust

[eospeed]

Sold

[eospeed]

sold