Does anyone have basic chassis dimensions we could use to start our chassis? We have done a lot of autocad work on our own here and looked a tons of pics we tried to scale and dimension . To start with we are looking for the length from rear rollbar hoop/bulkhead to the front rollhoop bulkhead. We are thinking around 36inches. Then from the front rollhoop to the front bulkhead/footbox. Here we are looking at 24 inches. Planning on centering the front axle at the center of the foot box. This would give us a total of 60 inches for the drivers compartment. We plan on using 1.5" dom tubing and for a bulkhead height and width of 22". We are looking at a wheelbase of 100 inches. Before we start bending and welding we would like to see if we are in the ballpark.