Results 1 to 11 of 11

Thread: Big pistons

  1. #1
    Senior Member
    Join Date
    11.01.15
    Location
    Beaver,PA
    Posts
    209
    Liked: 24

    Default Big pistons

    If engine builds are claiming 3 hp with the big piston motor why is there not another restrictor or weight penalty? If not I guess we all need to consider going that route….. is it true short block are still available?
    if it’s no big deal why are the motors advertised as “big piston” motors

    Do Kents need help and those without big piston Hondas?

    Like I said, builders claim this power….. It only makes sense to get them if you can afford it I guess.

    Btw had a great time running with FRP this weekend … Bob Wright is saving openwheel on the east coast.

  2. The following members LIKED this post:


  3. #2
    Senior Member Jonathan Lee's Avatar
    Join Date
    07.30.19
    Location
    Miami, Florida
    Posts
    162
    Liked: 348

    Default

    The actual mathematics of going 10 over only works out to around 1 hp.

    I'm sure you've heard of some Hondas having around 125 hp, and I'm sure the claims are accurate - as I have been on track with these people.

    I will guarantee you though, big pistons is not the reason why those engines are making that type of power.



    I like the Kent, it's very simple - like a go kart engine. There are plenty of parts, and diagnosing a problem is easier than the Honda.

    However, unless the rules change, a Kent will not be able to compete, unless it is coupled with a better driver or car...

  4. The following 6 users liked this post:


  5. #3
    Contributing Member Lotus7's Avatar
    Join Date
    08.10.05
    Location
    Savannah, GA
    Posts
    2,347
    Liked: 870

    Default

    Quote Originally Posted by Jonathan Lee View Post

    I'm sure you've heard of some Hondas having around 125 hp, and I'm sure the claims are accurate
    really? I must be wrenching too much and listening too little…. Who says who has 125 ?!?!?!
    Ian Macpherson
    Savannah, GA
    Race prep, support, and engineering.

  6. The following members LIKED this post:


  7. #4
    Classifieds Super License stonebridge20's Avatar
    Join Date
    01.13.06
    Location
    Danbury, CT.
    Posts
    3,765
    Liked: 2024

    Default

    Quote Originally Posted by Jonathan Lee View Post
    The actual mathematics of going 10 over only works out to around 1 hp..
    You're over simplifying it.

    There's more to it than just displacement.
    Stonebridge Sports & Classics ltd
    15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
    www.cryosciencetechnologies.com
    Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development

  8. The following members LIKED this post:


  9. #5
    Senior Member
    Join Date
    11.01.15
    Location
    Beaver,PA
    Posts
    209
    Liked: 24

    Default

    I believe the allowance of the pistons enabled a few other benefits. Like I said, builders claim 3hp. To me it sounds like if you can take advantage of this it is a no brainer. With my luck I will pay for the rebuild and then a rule change will come in… I am just making sure this nonsense does not happen but Jonathan my be right about other claims of 125hp… if so where can one get a motor like that?

  10. #6
    Senior Member David Clubine's Avatar
    Join Date
    01.29.03
    Location
    Ontario Canada
    Posts
    424
    Liked: 178

    Default

    We race cars not dynos, 125 hp is just a number.....


  11. #7
    Classifieds Super License Raceworks's Avatar
    Join Date
    07.03.07
    Location
    Cumming, GA
    Posts
    516
    Liked: 224

    Default

    Quote Originally Posted by GregPeluso View Post
    If engine builds are claiming 3 hp with the big piston motor why is there not another restrictor or weight penalty? If not I guess we all need to consider going that route….. is it true short block are still available?
    if it’s no big deal why are the motors advertised as “big piston” motors

    Do Kents need help and those without big piston Hondas?

    Like I said, builders claim this power….. It only makes sense to get them if you can afford it I guess.

    Btw had a great time running with FRP this weekend … Bob Wright is saving openwheel on the east coast.
    Engine builders have a vested interest in getting you to purchase their services, racers with money will spend as much as they can afford to cover all the bases "just to be sure." When it comes time to sell their cars or parts they'll add any adjectives that they think will increase the likelihood of a sale.

    The pistons are only a fraction of a millimeter bigger: you're looking at only about 10cc more volume, or about a half-tablespoon more displacement. A whopping increase of 0.6%, and it's still got to breathe through the same air restrictor.

    I've run crate engines, I've run pro-built engines, I've run engines that I've "freshened up" by cleaning & re-lapping the valves, I've run engines straight out of the junkyard. The only time I've noticed a speed difference was with the brand-new crate engines: they were slightly slower until the rings wore in. Everything else had no difference in speed or lap time according to the data.

    If you can afford a big-piston engine, get one. Why not? If you can't afford one, don't worry about it. Either DIY your own head or send it to Clubine or Quicksilver to freshen up. My extensive experience with Hondas is that most of the power to be gained or lost is in the heads. A lot of times I've been down on power it's because of slightly bent valves in the head. The engine will run fine, but on a leakdown test you'll notice significant leakage on one or two cylinders.

    We had a class in NASA we ran in the early 2000's that let you do any damn thing you wanted to the heads but the bottom ends had to be factory stock. We had a B18 that went from 195HP stock to 250, and it was all head work: a mild cam upgrade, some porting, and some creative cam timing adjustments. The thing had a weird quirk of trying to sometimes rotate backwards for half a revolution when you started it up, but it ran like Swiss Watch.
    Sam Lockwood
    Raceworks, Inc
    www.lockraceworks.com

  12. #8
    Contributing Member problemchild's Avatar
    Join Date
    10.22.02
    Location
    Ransomville, NY
    Posts
    5,743
    Liked: 4368

    Default

    Quote Originally Posted by Jonathan Lee View Post

    However, unless the rules change, a Kent will not be able to compete, unless it is coupled with a better driver or car...
    The traditional "spirit of the rules" Hondas that 98% of the community uses, including the top pro teams, cannot compete with the Super-Super kents or theses few mysterious Hondas. It was a great past decade for engine parity (corrected) in FF!!!!
    Last edited by problemchild; 06.16.24 at 4:20 PM.
    Greg Rice, RICERACEPREP.com
    2016 F2000 Champion, Follow RiceRacePrep on Instagram.
    2020 & 2022 F1600 Champion, 2020 SCCA FF Champion, 2021 SCCA FC Champion,
    Retirement Sale NOW, Everything must go!

  13. #9
    Contributing Member problemchild's Avatar
    Join Date
    10.22.02
    Location
    Ransomville, NY
    Posts
    5,743
    Liked: 4368

    Default

    Quote Originally Posted by Jonathan Lee View Post

    I like the Kent, it's very simple - like a go kart engine. There are plenty of parts, and diagnosing a problem is easier than the Honda.

    ..
    That may also have a relationship to the frequently of problems.
    Greg Rice, RICERACEPREP.com
    2016 F2000 Champion, Follow RiceRacePrep on Instagram.
    2020 & 2022 F1600 Champion, 2020 SCCA FF Champion, 2021 SCCA FC Champion,
    Retirement Sale NOW, Everything must go!

  14. #10
    Contributing Member John Nesbitt's Avatar
    Join Date
    07.04.03
    Location
    Ottawa
    Posts
    1,814
    Liked: 1033

    Default

    Quote Originally Posted by problemchild View Post
    The traditional "spirit of the rules" Hondas that 98% of the community uses, including the top pro teams, cannot compete with the Super-Super kents or theses few mysterious Hondas. It was a great past decade for engine parody in FF!!!!
    I think that you meant "parity". But SCCA lends itself very well to parody, also.
    John Nesbitt
    ex-Swift DB-1

  15. The following 3 users liked this post:


  16. #11
    Contributing Member problemchild's Avatar
    Join Date
    10.22.02
    Location
    Ransomville, NY
    Posts
    5,743
    Liked: 4368

    Default

    Quote Originally Posted by John Nesbitt View Post
    I think that you meant "parity". But SCCA lends itself very well to parody, also.
    Wow, is that an interesting and ironic slip of ignorance. Thanks for the correction.
    Greg Rice, RICERACEPREP.com
    2016 F2000 Champion, Follow RiceRacePrep on Instagram.
    2020 & 2022 F1600 Champion, 2020 SCCA FF Champion, 2021 SCCA FC Champion,
    Retirement Sale NOW, Everything must go!

  17. The following members LIKED this post:

    BLS

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social