Results 1 to 19 of 19
  1. #1
    Member jcolley's Avatar
    Join Date
    08.05.10
    Location
    Portland, Maine
    Posts
    82
    Liked: 23

    Default Replacement PFC Rotors

    Going through my car and have one rotor that measures slightly tweaked, causing some drag.

    PFC Rotors 255.10.0042.03 and .04, Pegasus says no longer made.

    Any alternative rotors compatible with the PFC calipers?

  2. #2
    Member jcolley's Avatar
    Join Date
    08.05.10
    Location
    Portland, Maine
    Posts
    82
    Liked: 23

    Default

    Nevermind, they appear to match dimensions of LD20 discs.

  3. #3
    Classifieds Super License BeerBudgetRacing's Avatar
    Join Date
    09.04.13
    Location
    Goleta, California
    Posts
    4,219
    Liked: 1313

    Default

    Yes, but the PFC 2 groove floating disc we use on FCs w/LD20s is no longer made either.

  4. #4
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    If you cannot find them elsewhere, I should be able to make them for you.

  5. The following 2 users liked this post:


  6. #5
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    I'll be receiving a sample rotor in the next few days to make a drawing from, so if anyone needs replacement rotors, I'll be able to make them quickly.

  7. The following 2 users liked this post:


  8. #6
    Member jcolley's Avatar
    Join Date
    08.05.10
    Location
    Portland, Maine
    Posts
    82
    Liked: 23

    Default

    Quote Originally Posted by R. Pare View Post
    I'll be receiving a sample rotor in the next few days to make a drawing from, so if anyone needs replacement rotors, I'll be able to make them quickly.
    I'm likely in for a set of 4.

  9. #7
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    I'll post again once I have a drawing ( and check my stock of blanks, of course!).

  10. #8
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Have the PFC rotors, and have made the drawings. Price should end up somewhere right around $200 each. I'm hoping to do decent sized batch so that the raw material cost can come down a bit.

    If anyone is interested, message me.

  11. The following members LIKED this post:


  12. #9
    Member jcolley's Avatar
    Join Date
    08.05.10
    Location
    Portland, Maine
    Posts
    82
    Liked: 23

    Default

    Quote Originally Posted by R. Pare View Post
    Have the PFC rotors, and have made the drawings. Price should end up somewhere right around $200 each. I'm hoping to do decent sized batch so that the raw material cost can come down a bit.

    If anyone is interested, message me.
    In for a set of four, will send you PM.

    Are these side specific like the PFCs or generic?

  13. #10
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    You can have them either way - if face grooved, they will be handed. Not grooved = not handed. $25 extra for the grooving.

    Will hopefully get a quote for a batch of blanks come Monday or Tuesday.
    Last edited by R. Pare; 05.10.24 at 5:26 PM.

  14. #11
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Quote came in just now. Rotor price will be $190 non-grooved.

    For those who want sets, let me know and I'll get the material in and get production going.

  15. The following members LIKED this post:

    BLS

  16. #12
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Material is ordered and most likely will be here week after next.

  17. #13
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    The material just arrived and I'll be starting on them later today.

  18. #14
    Senior Member FASTDAD's Avatar
    Join Date
    10.03.07
    Location
    Cannon Falls, MN
    Posts
    236
    Liked: 40

    Default Steel type

    Good morning to all,
    Curious minds want to know, what kind/type/no. of steel are the rotors made from?
    Thanks a lot.
    Todd
    I would rather be making racing news than reading it. Living the dream out here in the middle of farm country

  19. #15
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Ductile 80

  20. #16
    Senior Member FASTDAD's Avatar
    Join Date
    10.03.07
    Location
    Cannon Falls, MN
    Posts
    236
    Liked: 40

    Default Thanks

    Thanks for info about the rotors, good to know this stuff.
    Todd
    I would rather be making racing news than reading it. Living the dream out here in the middle of farm country

  21. #17
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    You can pay me back by ordering some!

  22. #18
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Am finally on the last lathe operation for these. If anyone wants any, let me know!

  23. #19
    Senior Member
    Join Date
    08.18.02
    Location
    Indy, IN
    Posts
    6,316
    Liked: 1907

    Default

    Whomever it was who wanted 2 car sets of rotors, message me - I somehow lost your email!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social