Results 1 to 10 of 10
  1. #1
    Contributing Member jemartin144's Avatar
    Join Date
    12.21.08
    Location
    chicago, illinois
    Posts
    46
    Liked: 11

    Default GSXR 600 year compatibility

    I am running 2006-07 GSXR 600 engines currently and I am wondering what the compatibility to newer engines would be. The 06-07 engines seem to be getting harder to find so if i could move to 08-09 or newer without much work that would be good to know.

    I believe the oil pans and headers should swap fine.
    The ECUs look the same so maybe i could just swap out the right year's ecu? i havent looked at a wiring diagram to see if the pinouts are different.
    Anything else with the electrical system that wouldnt be interchangeable?
    Are the mounting points/physical dimensions the same? just looking at pictures they look almost the exact same.

    thank you,

  2. #2
    Senior Member
    Join Date
    10.24.12
    Location
    Charlotte, NC
    Posts
    613
    Liked: 239

    Default

    Jason,

    Someone who knows these engines (like Clint) may answer here, but Leon and Jeremy would definitely know the answer.

    Cory

  3. #3
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    I am certain that cal Stewart knows this answer and i will ask him tomorrow!
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  4. #4
    Senior Member TDI PILOT's Avatar
    Join Date
    10.13.13
    Location
    Lapeer, MI
    Posts
    336
    Liked: 91

    Default

    There are 3 motor generations commonly used in our class

    06/07 Silver cylinder head, airbox mounts to throttle bodies with hose clamps

    08/09 Black cylinder head, airbox bolts into throttle bodies, different Cam shafts from prev generation

    2011-2015 Black cylinder head, updates to throttle bodies from 08/09, same airbox mounting, updated spark plug coils

    -The engine mounting points are exactly the same from 2006 thru 2015
    -The same oil pan and headers will work for all those years
    -The throttle bodies are a different design after 06/07 generation
    -The ECU's look the same but have different mapping thru the years
    -The wiring harness is slightly different for each generation, but may still work

  5. The following members LIKED this post:


  6. #5
    Senior Member
    Join Date
    09.07.12
    Location
    covington ga
    Posts
    306
    Liked: 72

    Default

    Quote Originally Posted by TDI PILOT View Post
    There are 3 motor generations commonly used in our class

    06/07 Silver cylinder head, airbox mounts to throttle bodies with hose clamps

    08/09 Black cylinder head, airbox bolts into throttle bodies, different Cam shafts from prev generation

    2011-2015 Black cylinder head, updates to throttle bodies from 08/09, same airbox mounting, updated spark plug coils

    -The engine mounting points are exactly the same from 2006 thru 2015
    -The same oil pan and headers will work for all those years
    -The throttle bodies are a different design after 06/07 generation
    -The ECU's look the same but have different mapping thru the years
    -The wiring harness is slightly different for each generation, but may still work
    The wiring harness,ecu,throttle bodies and air box will be different. The best thing to do is to buy a "car kit" off of ebay like the in this link. https://www.ebay.com/itm/2013-11-19-...0AAOSwjyhe5F5P
    Don't buy one with less than 3000 miles on it. If you do you'll likely blow it up due to the bearings being a bit on the tight side.

  7. The following members LIKED this post:


  8. #6
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    Listen to Clint.
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  9. #7
    Junior Member
    Join Date
    09.08.23
    Location
    Pennsylvania
    Posts
    2
    Liked: 0

    Default Need Help

    I have a 2013 GSXR 600 that my son was working on before he passed I would like to finish it for him but don't know what years I can use as a doner. Any help would be appreciated.

  10. #8
    Senior Member
    Join Date
    08.22.15
    Location
    Westfalia
    Posts
    1,855
    Liked: 1184

    Default

    So very sorry you lost your son, and hope you can finish this project as your tribute.
    Once we think we’ve mastered something, it’s over
    https://ericwunrow.photoshelter.com/index

  11. #9
    Senior Member
    Join Date
    11.01.09
    Location
    Indianapolis, In
    Posts
    465
    Liked: 32

    Default years

    Quote Originally Posted by Mikegsxr600 View Post
    I have a 2013 GSXR 600 that my son was working on before he passed I would like to finish it for him but don't know what years I can use as a doner. Any help would be appreciated.
    According to Wikipedia 2011-2020 should be interchangeable.

    Condolences on the loss of your son!

    Good luck!

  12. #10
    Junior Member
    Join Date
    09.08.23
    Location
    Pennsylvania
    Posts
    2
    Liked: 0

    Default

    Quote Originally Posted by allof6 View Post
    According to Wikipedia 2011-2020 should be interchangeable.

    Condolences on the loss of your son!

    Good luck!
    Thank You

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social