Dry sump scavenge 1/2 bsp to 3/4

[eflachbart]

Ok so I have scoured Pegasus et al looking for a solution to this. My Twin cam dry sump pan has a 1/2 bsp hose barb fitting. The scavenge pipe on the titan dry sump pump is 3/4 od. This sounds like a fundamental question but will the 1/2" id blue hose that pegasus sells expand enough to fit over the 3/4" od pipe into the pump?

Thanks

Eric

[Charlie Schmidt]

If I understand you, would 3230-8-12AN and something like 3288-12-045 from Pegasus work? the blue hose will not stretch, sometimes it's enough fun getting it on the right size barb

[eflachbart]

Not quite. The fitting on the pan is male, so the 1/2 bsp hose barb fitting is female. The scavenge pipe into the pump has no fitting the hose fits over the 3/4 od pipe and is clamped with an oetiker clamp.

If I could find a female 1/2 bsp to 3/4 id hose adapter it would work.

[eflachbart]

Got it.

For future reference if anyone has to do this Pegasus has the parts

1/2 BSP female to 12AN Male steel swivel
12AN Female to 3/4 hose barb
3/4 id textile reinforced hose
Oetiker clamps