Hans group purchase

Call SafeRacer and see. If not, you may still be able to get in on the CDOC order. I have yet to hear anything regarding my order so it may not be too late to have them place another order with HD.

Just an fyi for those that may still be waiting ( I think I was # 45ish). I recieved notification that my HANS shipped. Should be quite the sight at the dinner table this Thanksgiving!

Lee

I got mine yesterday. Thanks Sean for setting this up.

set up the HANS last night - i shortened the length of tethers from the frontmost edge of the metal clasp on the back of the unit to the tip of attachment part from the 7" that it arrived as down to approx. 6 1/4" - for the 94 VD FC it will be necessary to cut the head rest to half its thickness to allow for the HANS, otherwise it forces the head too far forward - ready for sebring thanksgiving weekend - also stuck the CDOC sticker on the car as per the deal - thanks to all - did eye just hear the five?

Hans Received Nov 22/05

Thanks Sean !

Got mine today. Quick fit has the shoulder belt buckles hitting the bottom of my helmet. Not good. Is there a discussion somewhere on what are the best belts to use with the HANS? (I also prefer non camloc belts.... they are much easier to get latched by myself)

Everyone:

I've been watching your posts and have several questions:

1.) How do/did you determine what degree (20, 30, 40) etc. to purchase,
and what is the difference between a large or medium?

2.) I drive a Citation FV that is neither a complete lay down like an old D-13,
nor a straight upright like an Adams Aero, so what would be the best choice?

3.) I barely make the rollbar compliance, and should I be concerned with the
compression of my head in a rollover etc..?

4.) I appreciate any advice you can provide me!

Thanks in advance!!!


Mark

Mark, Bill Styczynski was fitted by Dr. Bob Hubbard at the run-offs two years ago. He has a #40. It all depends on how you sit in your car. Check out the Hans web site for details.

Dave

Schroth Racing www.hmsmotorsport.com makes HANS specific belts. Several racers I know use them. Finding belts with a over center cam latch may be hard. Only problem I had with my Willians belts was the shoulder belt latches hitting the lip on a Bell Dominator style helmet. With a Bell Vortex the problem went away! :D

I purchased new belts from Safe-Quip... they have a set made for Hans users (SCCA legal) that are very well made and priced below (about 1/2) what others charge. The belts you would get now are dated 1/06 so they will be good until the end of 09!

and you are all very welcome!

How many other people are still waiting on theirs like I am? Just wondering...

Keith,

Mine showed up Monday, it was shipped on the 17th. Have you called Rob? He seems to be an up front and helpful guy.

Steve

just took a while to ship, but no problem nice piece of work,

Recieved mine two days ago, shipped Nov, 18th,

If your shoulder buckles hit the lower edge of your helmet, lengthen the straps at the frame attachment to move the position of the buckles further down your chest. Don't go too far or you will run out of lower belt length.

I ordered mine on 10/13 at noon. It arrived on 12/1.

I probably would have gotten it earlier if the liability release form that CDOC faxed me hadn't got lost in our mail room (CDOC won't ship the Hans until you fax the signed form back).

I just talked with Mark and he said they have their last order placed with HD and should be receiving their last 8 soon. For those who haven't received theirs yet, it shouldn't be much longer. :)

Hi, with regards to the purchase of a Hans Device, I would be very interested in obtaining one as well. 30 Degree Med, 17inch neck,,, Jerry here from Lancaster, Pa. 89 VD,01 VD.

Thanks for trying to put this all together.

Jerry

Just wanted to follow up on the statis of the group purchase. Is it still available and if so what was the final outcome of the purchase price? I do want to purchase a 30 L economy.


Thanks
Mark Blythe