Pressure Plate to Flywheel Bolt Recommendations

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

Quote:

---

Originally Posted by Rick Iverson

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

---

When I ran this sort of setup, I used AN bolts, washers and nyloc nuts. Never had a problem.

Dave

Quote:

---

Originally Posted by Rick Iverson

Gents:

Typical grade, thread, torque specs, vendors, as well as best practice for bolt securing methods (read: Loctite, et al), please.

---

Allen bolts and hardened AN washers with a tiny bit of Neverseez or equivalent at 18-20 lb-ft. Never had an issue with that.

Quote:

---

Originally Posted by Dave Gomberg

When I ran this sort of setup, I used AN bolts, washers and nyloc nuts. Never had a problem.

Dave

---

Quote:

---

Originally Posted by DaveW

Allen bolts and hardened AN washers with a tiny bit of Neverseez or equivalent at 18-20 lb-ft. Never had an issue with that.

---

Thanks, Fellas.