What part is this? Threaded throttle cable anchor? Titan Mk6

Hi. 1st post. New to FF. Just bought a '70 Titan Mk6. And not a very good mechanic...

Can anyone tell me what these are called? They anchor the throttle cable at each end (carb & pedal). 5/16-24 threads.

I'm going to try and clean up the threads. But, if I could source new ones, I'd feel better.

Thanks!
Skip

https://www.apexspeed.com/forums/att...d=115050&stc=1

Pegasus calls them a barrel end clamp:
https://www.pegasusautoracing.com/pr...sp?RecID=12184

Comet calls it a cable clamp:
https://cometkartsales.com/collectio...=Single%20Bolt

5/16-24 seems HUGE, though. Are we talking something else?

Quote:

---

Originally Posted by Mike B

5/16-24 seems HUGE, though. Are we talking something else?

---

Those look like the cable housing mounts, you know the things that hold the cable assembly to the chassis, not the actual cable end fittings.

Steve

Quote:

---

Originally Posted by SteveG

Those look like the cable housing mounts, you know the things that hold the cable assembly to the chassis, not the actual cable end fittings.

Steve

---

Yes. They hold the throttle cable to the chassis. Bolt goes through a hole in the chassis... The female thread is what the throttle cable threads into.

Thanks!

Maybe these guys can help https://teamterrificracing.net/TitanRegistry/

Personally, I'd make my own but I have a lathe.

Steve

https://www.piercemanifolds.com/THRE.../99005.355.htm