Carberator needed for my 1971 hawke Formular Ford

Printable View

11.19.23, 11:39 AM
rkozinski

Carberator needed for my 1971 hawke Formular Ford

During my resturation I noticed a crack runing down the outside of my carberator. I am thinking that I will need a new one.
Does anyone have a source?
Thank you
11.19.23, 11:57 AM
johnhafkenschiel

FF carburetor

You are probably looking for a Weber 32/36 DGV. New ones are available at PegasusAutoRacing.com from $399 to $679.
There is probably a reason your old carb cracked. You will want to investigate and resolve that.
11.19.23, 11:59 AM
pooch776

Ivey Engines. https://iveyengines.com

They have race prepped carbs in stock. They sell their carbs to Pegasus.

Bolt it on, set the idle and go racing.

Joe
11.19.23, 12:04 PM
E1pix

Deleted in the interest of accurate Hawke history preservation.
11.19.23, 2:34 PM
rkozinski

Quote:

Originally Posted by E1pix

This is very off-topic, but curiosity demands I ask…

Does your Hawke, per chance, have an additional square-tube section welded over the width of the front framerail to prevent bottoming out? And/or, do you know who the original owner was?

If so, the car belonged to a late, near-lifetime friend — and is both of great significance to me, and to FF history.

Hello
No it does not
11.19.23, 2:35 PM
rkozinski

Quote:

Originally Posted by johnhafkenschiel

You are probably looking for a Weber 32/36 DGV. New ones are available at PegasusAutoRacing.com from $399 to $679.
There is probably a reason your old carb cracked. You will want to investigate and resolve that.

Hello
Thank you
11.29.23, 5:07 AM
Elessar

You can try checking out local auto parts stores or even online shops like Amazon or eBay. I think with 500$ you'll get it.
11.29.23, 1:38 PM
Robert J. Alder

Go with Ivey. You'll never regret it. They must be raced prepped, which is NOT a DIY proposition!
12.02.23, 3:15 PM
Beach Racing Cars

Are you still looking for a carb?

John

Quote:

Originally Posted by rkozinski

During my resturation I noticed a crack runing down the outside of my carberator. I am thinking that I will need a new one.
Does anyone have a source?
Thank you
12.02.23, 4:26 PM
E1pix

Quote:

Originally Posted by rkozinski

Hello
No it does not

Darn, was worth asking and Thanks for answering.

Would you mind deleting my quote from your reply above?

Chassis piracy is terrible these days, and though odds are low in this case I’d never want to risk an unscrupulous seller reading my post and claiming any car was my friend’s based on info I’ve provided — and I am likely the only person in the world to know this telling detail.

This was my friend I was referring to… long read, but you might enjoy:
https://www.apexspeed.com/forums/sho...ler-Really-Was