Printable View
Here is a pic of my 2-stage zero-roll suspension.
https://www.apexspeed.com/forums/att...d=106365&stc=1https://www.apexspeed.com/forums/att...d=106366&stc=1
Here are a few pics of one of my 4-shock suspension systems.https://www.apexspeed.com/forums/att...d=106364&stc=1https://www.apexspeed.com/forums/att...d=106363&stc=1
Looking at the photo with two shocks mounted to one rocker, where are the other ends of the shocks mounted?
Brian
The 4-shock configuration was not zero-roll. The shocks were mounted solidly onto a subframe assembly that bolted in over the engine. I tried various droop limiters but the z-bar was the most effective as I could quickly change the rear wheel rate. When I made my own inboard Z-bars, they would tear themselves up (due to low budget fab and heat-treating).