Van Diemen Billet Front Uprights

Left and right side billet front uprights for Van Diemen models 97-current. New, never used

Each cost $355 new. Selling for $270 each plus shipping OBO

https://www.apexspeed.com/forums/att...id=95762&stc=1https://www.apexspeed.com/forums/att...id=95763&stc=1

Still available, clearing out some garage/trailer space.

What is the diameter of where the bearing would sit


Sent from my iPad using Tapatalk

Are these the design whereby the LF can also be used on the RR, and RF on LR?

Quote:

---

Originally Posted by Lotus7

Are these the design whereby the LF can also be used on the RR, and RF on LR?

---

I would say no. The rear uprights do not have two camber block holes on the top of the uprights, there are four threaded holes on the rears. I can post pictures if you're interested.

Quote:

---

Originally Posted by Lotus7

Are these the design whereby the LF can also be used on the RR, and RF on LR?

---

No, these are just for the LF and RF corners.
https://www.primusracingparts.com/fr...LH_p_4737.html
https://www.primusracingparts.com/fr...RH_p_4738.html

These are the universal uprights:
https://www.primusracingparts.com/Va...ear_p_237.html

I believe you could still use these are rears, you'd just need the adapter blocks in addition.
https://www.primusracingparts.com/Ad...ar_p_4735.html

Quote:

---

Originally Posted by TE37

What is the diameter of where the bearing would sit


Sent from my iPad using Tapatalk

---

My measurements say 3 15/32 inches or 88mm.

Still for sale