For Sale: March 74B roller for assembly

https://www.apexspeed.com/forums/att...id=93934&stc=1https://www.apexspeed.com/forums/att...id=93935&stc=1https://www.apexspeed.com/forums/att...id=93936&stc=1https://www.apexspeed.com/forums/att...id=93937&stc=1https://www.apexspeed.com/forums/att...id=93938&stc=1https://www.apexspeed.com/forums/att...id=93939&stc=1This is March 74B-06. Not run since 1980's and never crashed. All there except the engine. Front rad model as originally run in Atlantic series by Bruce Jensen. All suspension and tubular parts freshly plated. I'll be attaching several photos over the next few days.
USD 20,000. Located in Ontario. Ron Rogers

Quote:

---

Originally Posted by Ron Rogers

https://www.apexspeed.com/forums/att...id=93934&stc=1https://www.apexspeed.com/forums/att...id=93935&stc=1https://www.apexspeed.com/forums/att...id=93936&stc=1https://www.apexspeed.com/forums/att...id=93937&stc=1https://www.apexspeed.com/forums/att...id=93938&stc=1https://www.apexspeed.com/forums/att...id=93939&stc=1This is March 74B-06. Not run since 1980's and never crashed. All there except the engine. Front rad model as originally run in Atlantic series by Bruce Jensen. All suspension and tubular parts freshly plated. I'll be attaching several photos over the next few days.
USD 20,000. Located in Ontario. Ron Rogers

---

Years ago, Ron fabbed up and installed a cast alloy front bulkhead for my 78B. After that, i took what was left of the Lola 492 i had bought (C Sports, D Sports, S2000, rotary, VW, BDAs all installed at one point in time or another by a fellow who welds bridges (if you get my drift) and had Ron rebuild what was left of the tub. I had ordered a new body from TW Moldings, but with the degree of work that had to be done on the tub (we re-used pieces where possible, but there was more new than old in it!) common sense would tell you that fitting a new body on it would require some serious work.

Nah. Body dropped on. Darn near perfect!

All to say, Ron is a heck of a fabricator, and a great guy to do business with. I have nothing to say about the car, but I would not hesitate to deal with ROn.

Good luck with the sale, Ron

cheers,
BT

Bill,
Comments most appreciated. Your degree of satisfaction is always our aim on any job. Pleasure working on your projects.
Cheers,
Ron