Spec Racer Ford possibly coming to rFactor2

See the WIP thread here:

http://isiforums.net/f/showthread.ph...pec-Racer-Ford

cool, if they need anything let me know, may be i can help them or put them in touch with people who can

He will most likely need some dimensional data among other things. Do you have rFactor2? We're also looking for someone who has had a lot of seat time in a Gen2 and Gen3 SRF with rFactor2 to be a test dummy. :D

Quote:

---

Originally Posted by Keith Carter

He will most likely need some dimensional data among other things. Do you have rFactor2? We're also looking for someone who has had a lot of seat time in a Gen2 and Gen3 SRF with rFactor2 to be a test dummy. :D

---

I can help with that! In the place where you set front grip, it's a scale of 1-100, set it to -5. ;-)

did this ever happen?

Still a wip. I'll send you a pm.

For anyone willing to help, we're looking to get the following information for the SRF (gen2 or gen3):

• Suspension geometry;
• Spring, shock and bump stop rates (and travel);
• Weights and dimensions for the car, rims (2 of the most common composites should suffice, I'd say aluminium and steel) and wheel hubs;
• Aerodynamic values (downforce and drag) separated by main body, front and rear elements and overall, if possible, at varying speeds (3 should be enough, more would be good);
• All tire data you can get me (dimensions, construction, slip curves, etc).
• Engine HP and torque curves / dyno sheet

http://scca-e.com/race-cars/spec-racer-ford/

some of the specs are for Gen2, i would give Enterprises a call for Gen3 motor specs

again may be for gen 2

http://www.mummbrothers.com/SRF_Stuf...ske_Shocks.htm

try Shawn at motion dynamics, tell him i sent ya, he has my car up there in NH.

This thread is a little old, but any hope of the SRF coming to rFactor 2?