Home
ApexSpeed Portal HomeApexSPeed Reader GalleryApexSpeed.blogsApexSpeed AdvertisingForums










Go Back   ApexSpeed > Formula Atlantic > FA: Classifieds: For Sale
Reload this Page FS: WA FA 4ag head assembled with ecu
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools
Old January 25th, 2010, 1:58 PM   #1
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
For Sale FS: WA FA 4ag head assembled with ecu
Hey my name is Jae. (206)718-7179
just testing to see if anyone is interested in N/A high hp race engine..
Every parts are exact parts they use in FA except: cams, cam gears. the cams and cam gears thats on there right now is 272 8.5mm lift cosworth camshafts and AEM adjustable cam gears (silver).
the only thing missing from it running is a valve cover. I don't have it. you can't use your stock valve cover though
Assembled by Ray at garage autohero.
Everything is located in garage autohero

http://garageautohero.wordpress.com/

I just registered for this forums just to sell this, but the this is the original link of a forum that i am a little bit more credible..

http://hachiroku.net/forums/showthread.php?t=20306
http://forums.club4ag.com/zerothread?id=66614

Price: $7,000

port and polished head
TRD stainless steel Valves oversized by 1mm
TRD dual valve springs
TRD titanium retainers
TRD shims
TRD bucket lifter
TRD ITB with Bosch Injector
TRD Fuel regulator
TRD coils
TRD spark plug wires
TRD old school ecu (it says toyota atlantic championship)
TRD wiring harness basically plug and play

the pictures are before the machine work and the assembly




















I'll have more pictures up of the machined and assembled soon
Thanks for looking

again my name is Jae (206)718-7179 text or call
Last edited by jp7179; January 25th, 2010 at 2:11 PM.
jp7179 is offline   Reply With Quote
Old January 28th, 2010, 1:44 PM   #2
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
price is obo
jp7179 is offline   Reply With Quote
Old February 5th, 2010, 4:08 PM   #3
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
still available..
jp7179 is offline   Reply With Quote
Old February 8th, 2010, 4:46 PM   #4
mward
Member
 
Join Date: January 27th, 2006
Location: South Florida
Posts: 42
Default
Would you be parting it out at some point if it does not sell? I would be interested in the intake as a spare.
mward is offline   Reply With Quote
Old February 10th, 2010, 5:18 AM   #5
levinracer
Junior Member
 
Join Date: July 31st, 2009
Location: australia
Posts: 7
Default
how much for the bare cylinder head? and who ported it? is it from an atlatic engine originally?

brad
levinracer is offline   Reply With Quote
Old February 10th, 2010, 1:49 PM   #6
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
everything is as a spec for the formula atlantic. i would rather sell as an assembled head.. everything is trd.. if you want, i can sell you w/o cams, intake manifold, ecu, and wiring. let me know if you are interested in that..
(206)718-7179 thanks
jp7179 is offline   Reply With Quote
Old February 10th, 2010, 10:12 PM   #7
Rally05
Junior Member
 
Join Date: February 10th, 2010
Location: Guyana
Posts: 2
Default
is it a big port or small port? how much would be for the head without cams, cam gear, intake manifold, wiring etc. just the head alone?
Rally05 is offline   Reply With Quote
Old February 16th, 2010, 3:08 PM   #8
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
head alone price down to $4500 obo.. give me a call if anyone is interested. thanks
jp7179 is offline   Reply With Quote
Old February 23rd, 2010, 3:25 PM   #9
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
is the price too high??
jp7179 is offline   Reply With Quote
Old February 23rd, 2010, 3:35 PM   #10
mward
Member
 
Join Date: January 27th, 2006
Location: South Florida
Posts: 42
Default
I don't know about the price, but it seems many members here rely on their engine builders for complete dyno'd engines rather than used parts for a rainy day. I am still interested in the intake manifold setup if you do part out what you have. PM me here or email me at nospam at bocafed dot org. You may want to try ebay. A member posted some TRD parts from an engine that broke a piston. He listed the same parts on ebay, and they sold for a premium compared to what he was originally asking here. Good luck. Also you may try listing them on club4ag.com
Last edited by mward; February 23rd, 2010 at 3:36 PM. Reason: another idea
mward is offline   Reply With Quote
Old March 2nd, 2010, 6:38 PM   #11
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
any interests if i part it out??
jp7179 is offline   Reply With Quote
Old March 3rd, 2010, 9:29 AM   #12
mward
Member
 
Join Date: January 27th, 2006
Location: South Florida
Posts: 42
Default
I would be interested in the throttle bodies. You should be able to PM me here or you can email me nospam at bocafed dot org
mward is offline   Reply With Quote
Old March 4th, 2010, 5:01 AM   #13
isac
Junior Member
 
Join Date: May 3rd, 2008
Location: Portugal
Posts: 2
Default
Send email with price for coilpacks and plug wires to isac.araujo <a> gmail.com
isac is offline   Reply With Quote
Old March 4th, 2010, 10:08 PM   #14
Rally05
Junior Member
 
Join Date: February 10th, 2010
Location: Guyana
Posts: 2
Default
do you have any new pics with the complete assembly and port and polish job and would you be willing to have the head pressure tested and certified crack free to check for any leaks and damages?
Rally05 is offline   Reply With Quote
Old March 5th, 2010, 6:00 PM   #15
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
hey.. this is Jae. the head was tested before it was ported and polished.. if it did have a crack there was no reason for me to start the whole build.. i will send you pictures of the head after the assembly if you give me your email address.. so let me know.. thanks for your interests..
jp7179 is offline   Reply With Quote
Old March 17th, 2010, 2:54 PM   #16
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default up with pictures after the assembly










jp7179 is offline   Reply With Quote
Old April 2nd, 2010, 1:04 PM   #17
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
taking offers.. shoot me an offer
jp7179 is offline   Reply With Quote
Old April 2nd, 2010, 6:24 PM   #18
levinracer
Junior Member
 
Join Date: July 31st, 2009
Location: australia
Posts: 7
Default
who ported this cylinder head, do you know the flow figures for this head? are you willing to sell it less the camshafts? if so, how much?

brad
levinracer is offline   Reply With Quote
Old April 2nd, 2010, 6:40 PM   #19
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
well the machine work was done through my engine builder..
and i will work with you on getting more information if you would like on who the machine work was done by and let you know.
i would rather talk to you over the phone to give you a detailed information.
i'll get back to you on my machine work guy. thanks


http://autosportseattle.com/index.html

thats the website..
Last edited by jp7179; April 2nd, 2010 at 7:13 PM.
jp7179 is offline   Reply With Quote
Old April 19th, 2010, 2:36 PM   #20
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
bump.. open to offers.. please make an offer
jp7179 is offline   Reply With Quote
Old May 6th, 2010, 7:58 PM   #21
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
bump 4500 takes all
jp7179 is offline   Reply With Quote
Old May 27th, 2010, 5:18 PM   #22
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
bump
jp7179 is offline   Reply With Quote
Old June 30th, 2010, 3:33 PM   #23
jp7179
Junior Member
 
Join Date: January 25th, 2010
Location: Seattle WA
Posts: 15
Default
bump
jp7179 is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:47 AM.
Contact Us - ApexSpeed.com - Top

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.