DB-1 Bolts

wsmith · August 18th, 2012, 5:38 PM

Need to know the bolt specs for the 4 bolts that bolt through the bell housing into the hewland side plates. Thanks!!

Wayne

*RussMcB* · August 18th, 2012, 9:39 PM

I bought some bolts recently from McMaster-Carr, maybe the same ones you're referring to - Four that hold the trans to the cast Swift rear assembly. Mine were loosening up occasionally and I could see the trans move when I used a floor jack on the back of the tranny. I ordered a box of ten, 3/8-16 x 1.5" with drilled socket heads so I could safety wire them. Let me know if you want me to send you some from the box.

wsmith · August 19th, 2012, 11:09 PM

Thanks Russ. I think I have a few in the shop.

Wayne