F3 rear 10.5" wheels

[RVJ]

Technomagnesio rears, 10 1/2" , Ralt 1/2" pins; -drive pattern around 3 1/2"; New, unused, dark gray paint, original, never mounted. Backspacing around 6 1/2"...

Some paint chips and scratches from storage.
$ 200 pair obo from 00927, will work w/buyer.

Ricardo

[Nevadanut]

Just to clarify - 13"... and they measure 10.5" mounting width from inside of bead seat? How much do they weigh? Thanks.

[RVJ]

Hi; sorry for slow response, haven't been around the forum for a while.
Wheel measurement taken from inside-to-inside beads. On a digital bath scale I got 9.6 lbs.

Backspace measured mounting surface to inner rim. 13" diameter, from middle of rim,-to-mid rim , actual tire mounting, inside diameter.

I bought them new to see if I could use them on the RT5, but the backspace don't allow it. The coating seen on the mounting surface is actual coating/ paper glue from new.

Hope that helps ?
Ricardo

[Nevadanut]

Inquiry concerning wheels sent.

[aldof4]

are they still availabe

[RVJ]

Have to report back: while grabbing them from storage for boxing up, I came up with only one of the wheels, not both I've stored all these years...have no idea what could have happened here..so..

For the time being ,I'll have to suspend sale until I can find the missing wheel .

I really have to apologize to you all, sorry for the inconvenience.

Ricardo

ps: Doug: feel free to delete the post if necessary.