1981 Tiga-Miriah S2000

[BEH]

For Sale: 1981 Tiga-Miriah S2000 $25,000.00 OBO (price lowered)

Well developed and completely race-ready. This car has a great history with SCCA and Midwestern Council logbooks--this car originally ran in the S2000 Pro-Series in California. This car is completely ready and needs nothing. This car will run 1:13s at Blackhawk Farms. Call Ben at (414) 659-9210 or email me at airmanben@hotmail.com for more information or pictures. Trades/partial trades considered (race cars or road cars)

Stats:
Mercer Motor (With the Good Rods and Pistons)
Gyro Diffuser
Stack dash with timing beacon
Custom sub floor
MSD with Rev Limiter
Prince rear subframe
Prince oil tank
New Willians Harness
new starter
new fly-wheel
new pinion gear
TECHSPEED rear cover (gearbox - jack point and overflow bottle holder)
AN Hardware throughout
New Rod Ends
light weight CV's
Newer Oil Cooler
Aluminum Summit Rad
Blue Silicone water hoses
Braided lines (Brake, Oil, Clutch, etc)
Rebuilt calipers (LD 65 front, Girling rear)
New brake hats
Welch Exhaust
TDI Axles
Mazda Hubs
New Axle Bearings (front and rear)
New sway bar bushings
Refurbished cell with new foam
New Masters
Rebuilt pedals with new bias controller
steel motor mounts
New shift linkage and bearings
Newer upper to lower cross member links
Custom cover plates to cover up all stamped holes
Refurbished Gearbox
Aircraft wire used throughout: switches, connections - everything
Newer Rotors
Rebuilt Rack

Also Included:

A spare nose is also included (in primer)

2 sets of GrakuComp rims: 1 set with mounted Good Year Slicks, 1 set of mounted Good Year Rains
2 additional sets of Slicks: 1 set of Good Years, 1 set of Hoosier

An Enclosed Dual-Axel Trailer is also available and can be factored into the deal if interested

[LAJ]

price?

[dc]

price?

I did the same thing...

It's hidden in the title: For Sale: 1981 Tiga-Miriah S2000 $29,000.00 OBO

[BEH]

I'm asking $29,000.00 OBO--I am open to trades

Here are a few additional pictures of my 1981 Tiga-Miriah.

Thanks,

Ben

[provamo]

lovely

[Fred Michael]

This is one of my former cars. I did the body swap on it and have the nose and center section molds. I also know where the tail mold is.
If you are thinking of buying this car don't let the body conversion scare you away.
Wish I had the cash, I would buy it back in a heartbeat!

Fred

[cjahn]

I ran this car for a number of years and had a ball trying to keep up with S2's while running CS2. After Fred did the hard work, I was the one who made a number of changes, and updates including the subfloor under the motor and putting a diffuser on it along with a number of other further developments.

I was the one that ran a 13 in it at BHF. There are race results to verify it.

The car is fast.

Cj

Note: There are more updates that I think that Ben may have forgotten for example the car has very strong billet cross members, not the porous original castings.

[Daniel Thompson]

Beautiful car!

[TT2911]

Any idea how big of a driver this can accommodate? I am 6'4" tall and 240 lbs.

[BEH]

The roll bar is a "tall man" roll hoop. I think you would fit just fine. You would just have to remove the standard fiberglass seat that I use--you would probably want to go with either a bead or foam seat. thanks for the question!

Thanks,

Ben

[Fred Michael]

I am 6'1", 260 and I fit comfortably.

[BEH]

Price is now $28,000.00 OBO. I am open to trades or partial trades--race cars or road cars

Call/Text Ben at 414-659-9210

[BEH]

Price includes transponder

An enclosed trailer is also available if interested

[cjahn]

It should be noted that when I owned this car ever old nut and bolt was replaced with proper AN bolts, washers, and nuts. I am tempted to buy it back!

[BEH]

Some additional photos

[BEH]

More Pics

[BEH]

bump

[Tigaman]

Fun cars. Roomy, quick and capable of running in front of Swifts and some late Lolas. Sounds like a good price and the car looks immaculate. GLWS!

[BEH]

Bump--Motivated to sell

[BEH]

Bump

[BEH]

Bump....very interested in trades (road cars or race cars)

[Tom Irwin]

This is one of my former cars. I did the body swap on it and have the nose and center section molds. I also know where the tail mold is.
If you are thinking of buying this car don't let the body conversion scare you away.
Wish I had the cash, I would buy it back in a heartbeat!

Fred

I have the tail mold and another center section mold.
It's on the west coast (LA)

any body that steps up to buy this car I will sell both molds for $1.00

[hartcliffebob]

hey Tom, remember me B.Bishop from LAX....

[BEH]

Price is now $26,000 OBO Road & Race Car Trades Considered

[BEH]

Price is now $25,000.00 or make offer. I am interested in trades--race cars or road cars (Porsche, British cars, American, ect.) Can deliver to the Hawk in July. I am also open to delivering elsewhere.

Call/Text Ben at 414-659-9210

[BEH]

Sold Thanks Apexspeed