1993 EuroSwift SC93 FF
Completely track ready.
Pushrod suspension on both ends
Ivey Engine with 15 hours, build receipt for 5700.00
New:
Rod bearings, main bearings, SCAT crank.
+5 Complete pistons with pinset and spirolocs, wristpins, timing chain,tensioner and follower. Engine contains all of the
newest and best parts., Ivey dyno sheet available to serious inquirers.
K&N air filter
Haynes Weber Manual
LD 200 with the following ratios:
First:
16:34
18:34
Top gears:
18:32
20:27
20:30
23:28
22:30
25:27
All dog rings and gears new or slightly used.
1 set(4) Panasports lightly used
1 set (4) Panasports brand new in boxes from Porter, never had tires mounted
AIM Mychron Data System, with USB cable, oil pressure, H2O temp, wheel speed sensor, integral lateral G sensor, RPM, etc.
New Aluminum radiators, never mounted, one spare used brass stock radiator.
Rev limiter installed (6700 RPM) stock rotor as spare
All suspension pieces removed, crack tested and painted 2011.
OEM SPAX shocks rebuilt and dynoed 2011.
Removable steering wheel.
All rod ends/heims new or near new.
New Crow belts, 2011
Carbon/Kevlar brake pads (Averill)
One set of single heat cycle Goodyear 430 slicks. One set of used, one weekend Sumitomo radials, suitable for rain use.
New in car battery, with Tender.
New Jump battery with external charger/Anderson plug
Hardwired AMB Transponder
Spares:
Front upright
Rear upright
Rear sway bar
Two brake rotors
European muffler
Misc pushrods/ bits and pieces
Complete setup notes, and receipts in binders.
Roll hoop SCCA compliant, with front aluminum crushbox, no SCCA logbook, but they have homoligation records.
In Laws' health issues forces sale.
10,500