Anyone have any experience with the Schroth belts (2"/3")that are made to work with the Hans Device?
Anyone have any experience with the Schroth belts (2"/3")that are made to work with the Hans Device?
I installed them in my Zink Z10 and they work well and are made so the adjuster is not on the Hans device unlike other belts.
Wooly
in my rf-85 i run the 3" all-around SCHROTH PROFI III FORMULA HANS
This belt has a 3 inch shoulder belt and a 3 inch lap belt. It comes with dual substraps and the lightest rotary camlock on the market. The substraps do not attach to the bottom of a camlock, rather they attach to the shoulder belts via D-rings on the Lap Belts. This allows for the deletion of the T-bar giving great comfort improvements for vehicles where your seating position is severely reclined, such as a formula car.
AMBROSE BULDO - Abuldo at AOL.com
CURRENT: Mid Life Crisis Racing Chump/Lemons Sometime Driver (Dodge Neon)
CURRENT: iKart Evo Rotax 125 Kart
GONE: CITATION 87/93 FC - Loved that car
GONE: VD RF-85FF , 1981 FIAT Spider Turbo
I have these in my FM (old style). Work well. We did have to move the attachment points of the shoulder belts closer together to keep the straps from sliding off the side of the HANS device.
Thanks for your replies!
Just ordered the Profi 3 Formula Hans with the 2" to 3" shoulder straps and the 3" lapbelts (bolt in). Once I put them in and try them out with my Hans I'll post the results.
Willians belts tag says expire 2005 Does this mean 1-1-2005 or 12-31-2005?
There are currently 1 users browsing this thread. (0 members and 1 guests)