My car came wiht a small home made tank. I'm looking to upgrade to a proper fuel cell. None of the basic offerings from fuelsafe appear to fit. Anyone out there with an RP33 know of an off the shelf solution? Pictures of your setup are appreciated.
My car came wiht a small home made tank. I'm looking to upgrade to a proper fuel cell. None of the basic offerings from fuelsafe appear to fit. Anyone out there with an RP33 know of an off the shelf solution? Pictures of your setup are appreciated.
I don’t think the RP33 is much different than my RP31, post a photo and dimensions.
in the RP31 I used an off the shelf ATL FC-150. I made the metal surround myself and had plenty of room to fit in the car.
-John Allen
Tacoma, WA
'82 Royale RP31M
(‘72 Royale RP16 stolen in 2022)
Ill grab some pic this weekend. It's only 14" between the lower frame rails. looks like that cell is 15" wide. Can't sit on top fo those rails because they ramp up in the rear, or I'd have to slide the cell forward a couple inches.
My cell is 16” wide, but an FC-152 is only 14” and a little longer..
my cell sits ON TOP of the lower rails with a metal can supporting it. Pm me and I will send you some photos of my solution.
-John Allen
Tacoma, WA
'82 Royale RP31M
(‘72 Royale RP16 stolen in 2022)
Digging through some of the paperwork that came wiht the car, it apparently had a fuel bladder that sat behind a bulkhead which my car lacks so any pictures of a RP33 fuel bladder and or bulkhead would be appreciated.
There are currently 1 users browsing this thread. (0 members and 1 guests)