Hey all past and present vector owners.
Looking for a starter. Kent 1600 installed now.
Any info / part numbers appreciated
Thanks
Don
Hey all past and present vector owners.
Looking for a starter. Kent 1600 installed now.
Any info / part numbers appreciated
Thanks
Don
Hi Don
From the looks of the bell housing and bolt pattern, the starter required is nothing special.
look on eBay for Wosp starters:
“Lotus Cortina MK1 MK2 9 tooth 2 bolt high torque slimline starter motor”
Wosp #LHS269-9-2
There is also a 3 bott which would be ideal for you car.
Check the number of teeth on the flywheel. If 110, then use the 9 tooth pinion.
if 130, then use the 10 tooth pinion.
say hello to Pierre for me.
Dan
Thanks
Will do
Dan has given you a good place to start.
Origanally my Vector had an off the shelf, 3 bolt starter, at the time my starter guy could not source parts for it, so I went with a Super Starter.
My problem...back in the day I had to have an adaptor made.
These days you probably will be able to find the exact starter for you application.
I did look for my old starter to see if it had a make and possible part number for you, but alas no luck.
Regards
Dave
Call Marc Bushman. 630-279-8834
Thanks to all who replied. Starter on the way
Ebay. Can't remember the last time I did that. WOSP lotus cortina starter.
Fingers crossed
There are currently 1 users browsing this thread. (0 members and 1 guests)