Open Motorsports Classifieds
Compact Analog Dash for sale
For Sale - $450
This tidy little dash is assembled and pre-wired and includes mating harness connectors with pigtails to splice into your own car harness wire loom.
It is configured to toggle the temperature gauge and pressure gauge each between two sensors
(i.e. water/oil temp and oil/fuel psi).
This gives you 5 total gauge functions with this 3 gauge dash! (RPM being the 5th function on dedicated center gauge)
The small lcd on the bottom is voltage meter. Lights at top currently paired wiring so 2 of same color function as one warning light which can be tied to any trigger you have coming from the car harness (i.e. shift light, warning light, status light).
Extra toggle, push button and pull switch can be wired to your requirements.
I have the wiring schematic for this dash and harness connectors as well.
Manifold with 3 sensors included. Note it is channeled so two sensors work with -3AN port on one end and one sensor works with -3AN port on other end. One additional unused port.
Dimensions: 9-1/2" wide x 4-1/2" tall, plus 1-1/4" height of voltmeter on bottom. Depth is just under 2-3/4".
Could be trimmed down to approx 7" wide if you remove the left (free functioning) toggle switch. No re-wiring required.
Height could be trimmed to approx 3-1/2" if you re-locate the 6 LEDs on top.
Reply With Quote