WTB AP triple plate clutch parts

[pakracer]

I know it's a long shot, but wondering if anyone might have a few parts for a special AP 7 1/4" clutch. They are not the same as the oldstyle Tilton or Quartermaster if you look at the photos. The teeth in the ring have a special pattern, a long tooth, then the normal teeth, then a short tooth. I'm looking for a floater plate and the plate right after the pressure plate cover. I have the ring, the cover and one floater plate. Thanks

[tlracer]

Although I can't help directly with the parts you need, the link below might help with the AP part numbers:
https://www.burtonpower.com/clutch-a...p2125acrv.html

[pakracer]

At least now I know what the part #'s are CP2613-103 for the pressure plate and CP2613-103 for the floater plate. Hope someone has them in the states. Thanks for the info.

[Phil Creighton]

I have two good pressure plates (thats what AP calls the ridged steel plate under the spring) and two floaters. All are dead flat with a straight edge.
One pressure plate has been bead blasted - other parts are as taken out as a set.
I kept them as a complete set from our prototype days but its unlikely I would go back to that style of clutch with the cars we run today.
Phil
$100 + freight?
philipcreighton at earthlink.net

[Phil Creighton]

Plates are sold
Thanks Apexspeed