2019 NEO Enclosed 18’ x 7.5’ + 4’ V-Nose Aluminum Trailer

[Dave J]

For sale is a 2019 NEO NAMR all aluminum, tandem axle trailer. I used it to trailer a Formula Vee race car and it has less than 2000 miles on it. The trailer can accommodate any open wheel race car.

It has an empty weight of 2300 LBS, a GVWR OF 7000 LBS and uses a 2- 5/16” ball hitch. The trailer has tandem Dexter 3500 LB torsion axles with self-adjusting brakes.

The trailer has the following options:

Custom charcoal front, black rear with a chrome slash exterior
Aluminum wheels
2 spare aluminum wheels (never used)
2 exterior spare tire mounts (one on each side of the v-nose)
24” stoneguard
ProStab Stabilizer jacks
Ramp door with NXP stainless latch system (single handle on the ramp door)
Proflap ramp door flap (beaver tail at the bottom of the ramp door)
Winch plate
Slide out step at the curbside door
78.5” interior height (6” taller than standard height)
¾” exterior grade plywood floor - painted
Sport tie-down system (L-track covering most of the floor)
E-Track on the floor for an open wheel car
Transition flap (it covers the gap between the trailer floor and the ramp)
ProTrac runners (metal runners mounted to the ramp)
3/8” plywood painted walls
LED interior light package with 110 volt outlets
Base and upper cabinets
2 table holders
Folding chair holder
2 tie-down racks
Broom holder
Shore power

If you bought this trailer with these options today, it would cost you about $16,000. You would also have to wait around 4 months for it to be built. I’m asking $14,000. It’s ready to take to the track and available now.

With full price offers I’ll include 2 folding tables, 2 motorcycle chocks, shore power cords and tie downs.

If you’re interested or have any questions, please PM or email me at davecardillo@hotmail.com

[Dave J]

SOLD SOLD SOLD

Please close this thread...