1976 Caldwell D-13 Formula Vee For Sale

[K.Whitworth]

Built by current owner over winter of 1975 and raced every season since. Fully SCCA and ICSCC legal and up-graded with four-wheel disc brakes. FIA six-point belts good until the end of 2022.

Spares include:
- extra engine
- extra transaxle
- 2 sets of (chromed) trailing arms
- 1 set of rear suspension struts
- 3 rebound stops
- extra steering box
- extra master cylinders
- 2 used shift linkages
- parts to make a full rebuild of a motor
- 3 sets of Hoosier dry tires, 1 set with 3 cycles left one with 5-6 cycles, and a brand new set with no use
- 2 sets of wet tires, 1 set of Hoosiers and one set of grooved Goodyears - 15” wheels
- Alignment jig for front end
- Centering spacers for front beam
- Cam gear puller
- Full set of carb jets and air density calculator
- Torque multiplier for flywheel and read hub nuts
- Springs and measuring tool for setting pushrod lengths
- Spare distributors, points, plugs
- Bushings to facilitate attaching belly pan, firewall, & instrument panel
- And much, much more.

$11,500 CDN
$8,275.00 US

$9,000 for car, spares and tools
$2,500 for trailer which has electric brakes, c/w tire rack and winch

Sorry, photo's not loading!)....but easily available thru email.

CONTACT OWNER in Victoria, BC Canada:

1.250.479.8975
Email to seldominn@shaw.ca

[fv9]

Built by current owner over winter of 1975 and raced every season since. Fully SCCA and ICSCC legal and up-graded with four-wheel disc brakes. FIA six-point belts good until the end of 2022.

Spares include:
- extra engine
- extra transaxle
- 2 sets of (chromed) trailing arms
- 1 set of rear suspension struts
- 3 rebound stops
- extra steering box
- extra master cylinders
- 2 used shift linkages
- parts to make a full rebuild of a motor
- 3 sets of Hoosier dry tires, 1 set with 3 cycles left one with 5-6 cycles, and a brand new set with no use
- 2 sets of wet tires, 1 set of Hoosiers and one set of grooved Goodyears - 15” wheels
- Alignment jig for front end
- Centering spacers for front beam
- Cam gear puller
- Full set of carb jets and air density calculator
- Torque multiplier for flywheel and read hub nuts
- Springs and measuring tool for setting pushrod lengths
- Spare distributors, points, plugs
- Bushings to facilitate attaching belly pan, firewall, & instrument panel
- And much, much more.

$11,500 CDN
$8,275.00 US

$9,000 for car, spares and tools
$2,500 for trailer which has electric brakes, c/w tire rack and winch

Sorry, photo's not loading!)....but easily available thru email.

CONTACT OWNER in Victoria, BC Canada:

1.250.479.8975
Email to seldominn@shaw.ca

Pauls old car! How is he? Tell him Quinn and Bob Posner say hello.