Does anyone have plans to build a formula car lift.
I know there use to be someone on here that would sell them for a donation but I know he passed away a few years ago. I beleive it was Mike McCarthy but I could be wrong.
Thanks
Jeff
Does anyone have plans to build a formula car lift.
I know there use to be someone on here that would sell them for a donation but I know he passed away a few years ago. I beleive it was Mike McCarthy but I could be wrong.
Thanks
Jeff
I'd like one too.
It was Brian McCarthy of SoCal.
I have part of the original file but the rest got corrupted & lost.
I've shared it with a few people out here over the last couple of years, so if somebody could please re-share it...
Glenn
Here are the plans. The idea was that you should donate to the SCCA Steet Survival program as a thank you.
https://www.dropbox.com/s/n9dcpd898y...yLift.zip?dl=0
1993 Citation FV
NEFV - 2022 Champion
NERRC - 2022 Champion
Thank you to everyone.
And RIP Brian.
No affiliation, but this is one of those exact lifts (as best I can visually see) for sale that might be of interest:
https://www.apexspeed.com/forums/sho...rmula-Car-Lift
-Mark
Mark Uhlmann
Vancouver, Canada
'12 Stohr WF1
Thank you mark. It would cost a fortune to ship because of size and weight.
I built this hoist decades ago. It is built from thin wall tubing, so it is light weight. It can be dis-assembled in minutes. I carried it in my trailer beside the race cars to use at the track. It is still being used by a customer today.
I built it to lift FF,FC, FSV. I even used it to lift a horse.
I had a 12 volt electric wench to lift the cars. Or a chain fall. The electric wench required some bracing that is not shwon in this drawing.
If you want plans send me a PM.
Mike Beauchamp
RF95 Prototype 2
Get your FIA rain lights here:
www.gyrodynamics.net/product/cartek-fia-rain-light/
The horse was down and could not get up because of foot problems.
The hoist is stable enough to lift 1100 pounds of something that wiggles as it is being lifted.
There are currently 1 users browsing this thread. (0 members and 1 guests)