Starting point: Spring rates recommendations?
My RF92’s suspension is a bit different than stock. The previous owner had the front mono shock converted to a dual shock set up by Pat Prince and I changed the rear to the EFM set up. The motion ratios are now both 1:1 (99% sure but I need to double check.) I think the stock RF90/91 FF dual shock set up is around 0.9 in the front and I know the rears are around 0.56.
So, what is the current thoughts on how stiff to set up the car? I was going to start with wheel rate = spring rate. I know this can be a controversial topic but I need to start somewhere. Probably doesn’t matter any... in my advanced age I’ll likely be DFL.
Again, thanks in advance for all the help.
Craig