Looking for info / pictures / parts of PRS 83SF

[T89 Designs]

Hello all, new member here looking to see if anyone could help me out with my PRS 83SF project car.

Firstly I a based in the UK but it seems that the are far more PRS Formula Fords running in North America than the UK/Europe, certainly there seem to be none of the 80's 'F' or 'SF' series of cars over here, only 70's 'RH' cars. That's why I have joined Apex speed.

The car I have bought appears to be a very unloved 83SF that was modified to run in Formula 4 in the 90's, my aim is to return it to original F2000 specification.

I have read the thread by member PRS82F and sent him a message but have had no reply (if anyone has any other contact details for him that would be appreciated)

I would love to see any pictures of PRS cars anyone has, somebody over here told me a PRS raced in US FF2000 around 2001-2002.

The areas of the car that have been modified are; the bodywork (replaced with some Van Diemen stuff), the front suspension/uprights (again VD pats bodged on) and possibly the Roll Hoop. So I would be really interested I anyone has any parts, moulds or jigs for those areas. A body top section would be top of my list.

I would also like to try to identify the chassis number as well if anyone knows of any records of the cars in the US

This is the car in question: https://racecarsdirect.com/Advert/De...mula-ford-2000

I have also attached the original launch article from Autosport

Please fee free to e-mail me on callan@t89.co.uk

Thankyou for your help, Cal

[Garey Guzman]

Here in the US, the F2000 spec is "FC" so you might get more info by posting this in the FC section.

Good luck on your research!

[T89 Designs]

Here in the US, the F2000 spec is "FC" so you might get more info by posting this in the FC section.

Good luck on your research!

Thankyou Garey, I didn't realise the FF2000 was FC over there.

I would still be interested to see pictures of the FF1600 PRS cars as they seem very similar under the skin and would also lk to get in touch with member PRS82F if possible.