Tiga S2000 parts - suspension & bodywork

[essex]

Following parts available for 80/81 Tiga S2000 - used unless otherwise marked. ALL SOLD

Complete body , nose, side pods, center section and tail.
Complete assembled RH rear corner; upright, hub, brake rotor, hub and driveshaft, top camber link and lower A arm.
Complete assembled RH front upright with brake rotor and hub
2 x rear uprights with bearings
2 x rear stub axles with CV flange
2 x straight plunging CV joints
2 x pairs engine frames
Top and bottom cast beams for rear suspension
Inboard rear brake rotor and hat
Dashboard roll over hoop
4 x rear radius rods
1 x pair Bilstein shocks - 110/30
1 x pair Bilstein shocks - 266/64
1 x pair top front suspension links - curved
3 x top front suspension links - curved
2 x top front suspension links - straight
2 x rear upright clevises
2 x LH lower front A arms
2 x RH front lower A arms
Gear linkage rods
4 x rear camber links
3 x nose frame stays
1 x pair rear lower A arm - one new
1 x new light weight alloy combined hub and brake hat.
Oil tank
2 x water swirl pots

Email: m.gue@att.net and let me know what you need and I can send pricing and pictures
Open to offers on a package deal