99 VD Parts and Pie... or should I say PI

[cjahn]

Looking for 99 VD+ bodywork and wings - minimal repairs or NONE and lightweight. Ideally low volume of paint or raw. NEED the inner ducts to rads, but open to anything.

Also looking for a water temp sending unit for a PI.

Ideally local (or near) Hartford, WI

[Pi_guy]

Looking for 99 VD+ bodywork and wings - minimal repairs or NONE and lightweight. Ideally low volume of paint or raw. NEED the inner ducts to rads, but open to anything.

Also looking for a water temp sending unit for a PI.

Ideally local (or near) Hartford, WI

Which connector is on the current one?

[cjahn]

Which connector is on the current one?

Looks like prior owner converted it from the large plug to two spade connectors? The sensor has three wires (from memory red, white, and black. The red and white are connected. Black and shielding is not.

Unit indicates "COLD" when the car is running and/or warmed up. (Plugged in or not). So I am not sure if it is a sensor or configuration issue.

THx!
CJ

[JEREMY HILL]

Mike Devins @ Hurley Race Products can help you with bodywork and wings