WTD: Racetech splined slug to match a quick release coupling

[RussMcB]

I bought a used steering wheel recently. It came with a Racetech quick release coupling bolted to it.

I had originally planned to swap over my own QR coupling from my old wheel, but, turns out, it will not work with the wheel I bought.

So, I'm hoping (long shot) someone might have a splined slug like the one pictured below on the right.

It is described as:

The hardened steel splined slug has to be welded to the steering column. The diameter of the splined section of the slug is 19.00mm and has 15 splines plus a master spline.

Thank you.

[stonebridge20]

I got one from these guys a few months ago. Racetech wants you to send the coupler so they can match the slug. Don't bother doing that. I made that mistake. Just ask to buy one.

http://www.race-parts.com/

[Steve Davis]

Trackside Tim carries some versions. You can call and see if he has one to match.

[RussMcB]

Thanks. You guys are great.