Aluminum Honeycomb for Composite Nose Construction

[fkennette]

I'm in the process of building a spare nose for my Mygale F2000 car, replicating the factory design which incorporates a 1/2" aluminum honeycomb sandwich panel horizontally across the inside of the nose, and what looks like 1/4" or slightly larger along sides. Does anyone know of a source to buy smaller pieces of the honeycomb material ? I'm using resin infusion to build the nose, so the panels need to have a barrier to prevent the resin from simply filling the honeycomb.
Thanks in advance,
Francis

[R. Pare]

https://www.apexspeed.com/forums/sho...378#post573378

Don't know just what she has left.

[UGLYDUCK]

I have a bunch of sheets of aluminum honey comb with unidirectional fiberglass sandwich. These are approx 1/2" total thickness. These are left over from previous projects. Size ranges from 12"x12" to 24"x24".
Free for the taking, just cover shipping.

[Bob L.]

https://www.shapirosupply.com/

Surplus place in St. Louis. (used to have lots of McDonald Douglas stuff) I bought some 1/4" thk., small cell (1/8 or 3/16) alum panels (2 ft x 40") several years ago, @ decent price. Worth checking; lots of other neat stuff, not everything is listed on web, call.

Bob L.

[fkennette]

Thanks everyone! Uglyduck, you have a P.M.

[RSS]

Which nose you replicating low or high?

[fkennette]

The one on the right - 2007 car.